Epson TM-C3500 Series Developer's Manual page 20

General settings
Print
Media type
quality
Wristbands Speed
Quality
(Mode1)
*1: In some cases, missing dots and irregularity in ink shots may occur when printing ladder barcodes,
resulting in the ANSI grade being lowered to F and making barcodes unreadable. Apply an
innovative method such as printing HRI characters.
*2: Ink may penetrate the paper due to its characteristics, causing the bars of printed barcodes to
become thicker. In such cases, reduce the data in a bar by one pixel and increase the blank space
by one pixel (Adjust Bar Width).
*3: The recommended values for specified media types and barcodes are as follows.
For wristbands and Code 128: Five-dot module and ANSI grade D
For wristbands and Codabar: Four-dot module, minimum element ratio of 2.5, and ANSI grade C
Q
NOTE
Font settings of barcodes/2-dimensional symbols
Print
Adjust
direction
*1
Bar
Width
Fence Yes
Ladder
Fence
Ladder
If an odd number value is set for the Module, changing the Media Type
and Print Quality causes the resolution to change, resulting in a change in
the size of the printed barcode.
Upper line: Minimum module (dot)
Lower line: Minimum element ratio
ANSI ANSI
*2
grade D or grade C or
higher higher
3 dot 4 dot
2.7 2.5
*3
6 dot -
*3
2.5
3 dot 4 dot
2.7 2.5
*3
6 dot -
*3
2.5
ANSI
grade B or
higher
-
-
20