Control By Mobile Apps - Philips 32PFL4765/F8 Manual

HDMI ® input. Next, select HDMI mode [Modo HDMI] and then select one of the
following settings:
•
Auto [Automático] – Let the TV determine the best setting. Use this option
unless your HDMI
compatibility.
•
HDMI 1.4 – Configure the input for compatibility with HDMI
supports a maximum refresh rate of 30 Hz at full UHD resolution. Most HDMI
devices will work correctly with the TV in this mode.
•
HDMI 2.0 – Configure the input for compatibility with HDMI
supports a maximum refresh rate of 60 Hz at full UHD resolution. You must use
this mode to view HDR content from the device connected to this HDMI
However, note that many older HDMI
®
TV's HDMI

Control by mobile apps

You can choose the level of control you want to allow your TV to accept from
external devices, such as smart phones, tablets, and virtual assistants. Device connect
settings enable other devices, including the Roku Mobile App, to control your TV over
the local area network in your home.
To adjust the level of external control access:
1. From the Home screen menu, navigate to Settings [Configuración] > System
[Sistema] > Advanced system settings [Configuración avanzada] > Control
by mobile apps [Control mediante aplicaciones móviles].
2. Select Network access [Acceso a la red].
3. Choose one of the following settings:
•
Default [Predeterminado] – Devices can connect only through a private
network address, and accept commands only from other private network
® device does not correctly communicate its HDMI
input is set to this mode.
® devices do not work correctly when the
102
® version
®
version 1.4, which
®
®
version 2.0, which
®
input.