Page 2
As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CE Conformity for European Countries The device complies with the EMC Directive 2014/30/EU and General Product Safety Directive 2001/95/EC. Following information is only for EU-member states: The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste, but use the return and collection systems available.
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive), and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Actual...
Contents Compliance Information ..........3 FCC Statement ......................3 CE Conformity for European Countries ..............4 Declaration of RoHS2 Compliance ................5 Product Overview ............8 Package contents ....................8 Front View ......................9 Rear View ......................10 Getting Started ............11 Connecting to Power ....................12 Connecting to a Display Device ................13 Connecting to an Audio Device ................13 Connecting to an IFP (OPS Built-in PC) Device ............14...
Page 7
OSD UI Description ....................21 Image ........................21 White Balance ....................... 21 HDMI Output ......................22 HDMI Output > Resolution settings ..............22 Audio ........................22 PIR Detector ......................22 Time Option......................23 Language ....................... 23 AI setting ....................... 23 Stitching Calibration ....................24 Save or Exit ......................
Rear View No. Components Description External audio source input. Audio In Note: Attaching an external audio source disables the built-in microphone. DC In DC jack 5V, system power input connector. HDMI OUT V1.4B (Type A) port. Connect to devices with HDMI input function. USB 2.0 for data transmission, network signal output, USB-C and an extension for audio and video.
Connecting to Power To connect your myViewBoard Sens to a power source, perform the following: 1. Connect one end of the power cord to the AC adapter and the other end to a power outlet. 2. Connect the AC adapter to the DC-in jack of your myViewBoard Sens.
Connecting to a Display Device Use an HDMI cable to connect to an external display. 1. Connect one end of the HDMI cable to the HDMI port of the myViewBoard Sens. 2. Connect the other end of the HDMI cable to the HDMI port of a display device. Monitor HDMI cable Connecting to an Audio Device...
Connecting to an IFP (OPS Built-in PC) Device Use an USB 3.1 Type C Male to Type C Male (or USB 2.0 Type C Male to USB A Male) cable to connect to an IFP (OPS Built-in PC) device. 1. Connect one end of the USB 3.1 Type C Male to Type C Male (or USB 2.0 Type C Male to USB A Male) cable to the USB Type C port of the myViewBoard Sens.
Making Connections USB Type C-Type C cable USB Type A - USB Type C cable Power adapter HDMI cable Audio source USB-C Connection Connect to a PC/laptop via a USB Type C-Type C cable or USB Type C-Type A cable to launch the myViewBoard Sens App.
Stitching Calibration After installing the hardware, you need to perform stitching calibration to ensure that the scene image quality meets the specifications. You can perform stitching calibration through the following operations. Method 1 When the OSD is off, long press (3 sec.) the up cursor to activate Stitching calibration.
Stitching Calibration Limitations Note that stitching calibration may encounter issues under the following conditions: 1. Objects are too near to the camera. 2. Objects within the same stitch ROI window are located at very different depth fields. 3. Objects within the same stitch ROI window have the same periodic pattern. 4.
OSD UI Description Short Press Note Cursor Up When OSD is off, long press (3 sec.) activates stitching calibration Down Cursor Down Left Cursor Left Back to the previous page Right Cursor Right Enter Enter Long press (3 sec.) When the OSD is off: activate the OSD When the OSD is on: Exit the OSD without saving Long Press ENTER (3 sec.) to activate the OSD menu: Image...
HDMI Output MENU Image White Balance Description: HDMI out will auto-detect a preferred mode via EDID to display the native HDMI Output resolution. Users can only set the resolution supported by the EDID of the Audio terminal device. PIR Detector Time Option Language AI Setting...
Time Option MENU Image Display White Balance Time Setup HDMI Output Description: Audio Display: Selects the date and time display format. Time Setup : Automatic update or Manual the date and time. PIR Detector Time Option Language AI Setting Stitching Calibration Save or Exit Language MENU...
Stitching Calibration MENU Image Restore Factory settings White Balance Activate HDMI Output Audio Description: Restore Factory settings : Back to the factory 6M calibration PIR Detector default setting. Time Option Activate : Execute stitching calibration.” Language AI Setting Stitching Calibration Save or Exit Save or Exit MENU...
Operating myViewBoard Sens Installing the myViewBoard Sens App Connect to the Windows store to download the myViewBoard Sens App. Select install, and then launch. Please refer to the screenshots below.
myViewBoard Sens Startup Screen Description Mood Sensing Shows percentages of 5 mood sensing responses (Smile / Amazed / Thinking / Anger / Sad). Suggestion Tips Provides suggestions to help keep the audience engaged so the detected mood index of the audience stays positive. Mood Index A composite index used to measure 5 mood sensing swings.
Page 27
Color Temperature The color temperature of a light source is the temperature of an ideal black-body radiator that radiates the light of a color comparable to that of the light source. Warm Light: 2300K~ 5000K Daylight: 5000K~ 6500K Cold Light: 6500K~ 9500K Movement Detection PIR sensors to sense motion.
Page 28
Changing the brightness/color levels while leaving mid-tones and highlight areas Color Shift unaffected. Noise Activates the high ISO noise reduction process of removing noise from an audio Reduction and image signal. Stitching Tele & Wide stitching calibration. Stitching calibration must be executed after Calibration the VBC100 installation is completed.
• Check that the sliding door of myViewBoard Sens is turned to the right position (power on). • If there is still no power, contact ViewSonic support or the reseller from whom the device was purchased. myViewBoard Sens LED indicator statuses...
Page 31
VIDEO Compression H.264 & MJPEG UVC mode For privacy concerns, no video output is produced. (AI internal processing is performed in Stitching mode: 7680 x 3296 P5 MJPEG) HDMI mode Stitching /Tele / Wide Mode Resolution 3840 x 2160 P30 3840 x 2160 P25 1920 x 1080 P60 1920 x 1080 P50...
For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product’s serial number. Country/ Region Website Country/ Region Website Asia Pacific & Africa Australia Bangladesh www.viewsonic.com/au/ www.viewsonic.com/bd/ 中国 (China) www.viewsonic.com.cn 香港 (繁體中文) www.viewsonic.com/hk/ Hong Kong (English) India www.viewsonic.com/hk-en/ www.viewsonic.com/in/...
If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Page 34
Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages...
Page 35
Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Villahermosa: Distribuciones y Servicios Computacionales SA de CV.
Page 36
C0 M91 Y72 K24 Process Color C0 M0 Y0 K100 Process Color C0 M91 Y72 K24 Process Color Pantone Black C Spot Color Pantone 187 C Spot Color...