Listening To A Cd (Cds) - Sharp CD-M10000W Operation Manual

Listening to a CD (CDs)

This system can play audio CD-R and CD-RW discs just as CD discs, but cannot per-
form recording. (However, some CD-R and CD-RW discs may not be played.)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the OPEN/CLOSE button to open the disc tray.
4
Place the CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to turn the
disc tray, then place the CD in the open position.
" CDs can be placed on any open position on the disc tray.
" Be sure to place 8 cm (3") CD(s) in the middle of the disc positions.
5
Press the OPEN/CLOSE button to close the disc tray.
Total number of tracks on the CD
whose number is flashing
6
To select the CD you want to listen to first, press one of the
3 buttons.
01/10/1 CD-M10000W(X)E2.fm
CD-M10000W
ENGLISH
12 cm (5") 8 cm (3")
Total playing time of the CD whose
number is flashing
1 -
Continued to the next page
E-14
General control (See page 12.)
1
2
3
4
5
6
7