Installing the Projector
Removing and Attaching the Projector Lens Unit
Warning
Make sure you disconnect the power cord from the projector before removing
or attaching the lens unit to the projector. Otherwise, it could cause an electric
shock.
Attaching
Attention
Do not attach the lens unit when the projector's lens insertion section is
facing up. Dust or dirt could enter the projector.
Try not to touch the lens section with your hand or fingers. If fingerprints or
oils are left on the surface of the lens, projection quality deteriorates.
a
The projector supports lens with the following model numbers.
ELPLR05/ELPLU05/ELPLW07/ELPLM12/ELPLM13/ELPLM14/
ELPLL09/ELPLL10
a
Loosen the lens cover fixing screws.
Turn the screws by hand.
b
While pressing the tabs on both sides of the lens replacement
cover, pull it towards you to remove it.
c
Turn the lock lever counterclockwise.
30