1. Manuals
  2. Brands
  3. Rayco Manuals
  4. Lawn and Garden Equipment
  5. C275
  6. Operator, service, maintenance manual

Rayco C275 Operator, Service, Maintenance Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

C275
OPERATOR · SERVICE · MAINTENANCE MANUAL
RAYCO MANUFACTURING © 2019 ALL RIGHTS RESERVED
PRINTED IN USA
INDEX: OSMC275-19

Advertisement

Table of Contents
loading

Related Manuals for Rayco C275

Summary of Contents for Rayco C275

  • Page 1 C275 OPERATOR · SERVICE · MAINTENANCE MANUAL RAYCO MANUFACTURING © 2019 ALL RIGHTS RESERVED PRINTED IN USA INDEX: OSMC275-19...
  • Page 2 CONSTITUENTS ARE KNOWN IN THE STATE OF CALIFORNIA TO CAUSE CANCER AND REPRODUCTIVE HARM. VISIT WWW.P65WARNINGS.CA.GOV NOTICE: Maintenance and Repairs should ONLY be performed by a trained specialists or qualified person. Please contact Rayco Mfg for a listing of approved maintenance facilities in your area.

  • Page 3: Table Of Contents

    C275 Operation & Service Manual TABLE OF CONTENTS Forward Safety Operation Specifications Maintenance Troubleshoot Warranty 800.392.2686...
  • Page 4 Parts Parts are readily found through illustrations with accompanying Rayco part numbers. The machine assembly is listed by basic groups to enable ease of finding parts. Please consult your local Rayco Dealer or local Engine Manufacturer Dealer for obtaining engine parts and service.
  • Page 5 Foreword Machine Description Serial Numbers Whenever communicating with Rayco or your Rayco dealer, The T260 stumper offers a solution for contractors looking have your machine serial number handy, as it can help for a mid-sized stump cutter with premium features and top pinpoint most exactly what information is need ed in caring level performance.
  • Page 6 DEF tank. Breakdown of the serial number For Example: C275 001 C275 - Type of Rayco equipment you have 001 - Three digit for the number of produced 02 - Two digit month, 01 = Jan., 02 = Feb., etc...
  • Page 7 C275 Operation & Service Manual Serial Number Location & Information Identification Numbers Model Number Serial Number Machine Engine Implement Implement Dealer Information Name Address Dealer Contact Phone Number Hours Sales Parts Service 800.392.2686...

  • Page 8: Safety

    C275 Operation & Service Manual Safety California Proposition Keep the equipment free from foreign material. Remove debris, oil, tools, and other items from the deck, from walkways, and from steps. 65 Warning Secure all loose items such as lunch boxes, tools, and other Diesel engine exhaust and some of its constituents are known items that are not a part of the equipment.
  • Page 9 Rayco, you must use it only if you have accurately evaluated precautions. An accident can often be avoided by recognizing it and found that it threatens no one’s safety. You should potentially hazardous situations before an accident occurs.
  • Page 10 C275 Operation & Service Manual Safety General Hazard Information (PPE) Head protection must conform to ANSI Z89.1 and DO NOT wear under chin strapping while operating or within the operation area of the Horizontal Grinder. Eye protection must conform to ANSI Z87.1 and be the wrap around style.
  • Page 11 Use caution if you disconnect Rayco recommends the use of only genuine Rayco hydraulic lines of fittings. High pressure oil that is released replacement parts. Use the following guidelines when you can cause a hose to whip.
  • Page 12 C275 Operation & Service Manual Safety Improperly disposing of waste can threaten the environment. Always shut-off the engine and wait for all moving parts, Potentially harmful fluids should be disposed of according belts, fans, rotors, drums, cutting wheels (etc) to come to a to local regulations.Always use leak proof containers when...
  • Page 13 C275 Operation & Service Manual Safety When the engine is at operating temperature, the engine Electrolyte is an acid. Electrolyte can cause personal injury. Do not allow electrolyte to contact the skin or the eyes. Always wear protective glasses for servicing batteries. Wash hands after touching the batteries and connectors.
  • Page 14 Repair any lines that are loose or damaged. Leaks can across the terminal posts. Use a voltmeter or a hydrometer. cause fires. Consult your Rayco dealer for repair or for Improper jumper cable connections can cause an explosion replacement parts.
  • Page 15 Replacement parts which are authorized by Never operate or allow someone to operate the machine while Rayco are the only parts which should be used for repair or under the influence of alcohol, drugs, or any medication that replacement on this machine.
  • Page 16 Operation and Maintenance Manual, “Reference Material”. always keep the ROPS installed during machine operation. Consult your Rayco dealer in order to obtain copies of the Observe all applicable local government regulations when material. The information should be reviewed by every person you use this machine.
  • Page 17 Speed of travel – At higher speeds, forces of inertia tend to Only use work tools that are approved by Rayco for use on make the machine less stable. Rayco machines. Refer to the Operation and Maintenance Manual, Rayco options”.
  • Page 18 C275 Operation & Service Manual Safety Equipment Lowering with Engine b: Brake and steering systems c: Controls, hydraulic system and linkages Stopped • Keep the terrain in good condition. Before lowering any equipment with the engine stopped, a. Remove any large rocks or obstacles.
  • Page 19 Rayco or polycarbonate front guards that are and its intent to comply with OSHA regulations. approved by Rayco are available for machines with a cab or an open canopy. On machines that are equipped with cabs, Lock Out Procedure the windshield should also be closed.
  • Page 20 C275 Operation & Service Manual Safety that supplies energy to the equipment. In case of mechanical 5. Check to see that all affected persons are located in a energy, a block may be used to stop the release of safe position.
  • Page 21 C275 Operation & Service Manual Safety IF WHIPPING or SWAY OCCURS, DO NOT steer. DO NOT apply your brakes and NEVER speed up. Let off the gas pedal and hold the steering wheel in a straight-ahead position. A “combination disturbance” is improper handling, whipping,...

  • Page 22: Operation

    All jobs (connection, starting and movement checks) must be performed by specialized personnel only. Consult your RAYCO dealer for special cutting wheels and The company using the cutter boom must instruct its personnel teeth available for a variety of applications.
  • Page 23 C275 Operation & Service Manual Operation Know Your Machine 1. Engine Access 2. Hydraulic Oil Cooler 3. Fuel Tank 4. Hydraulic Tank 5. Cab Door (entry) 6. Cab Escape Hatch & Window 7. Boom Swing Cylinder 8. Chain Guard 9. Final Drive Motor 10.
  • Page 24 ROPS/FOPS can weaken the structure. See your Rayco dealer for mounting guidelines. • Any alteration that is not specifically authorized by Rayco • Get on or off the machine only at locations that are invalidates the certification for the ROPS/FOPS. The equipped with steps and/or hand holds.
  • Page 25 C275 Operation & Service Manual Operation Starting Procedure Pre-Operation Warm-Up Allow a cold engine to warm up at a low idle for at least five minutes. To help the hydraulic systems to warm up faster, cycle the controls. Raise the mower to its upper limit and continue pulling the mower control joystick back.
  • Page 26 C275 Operation & Service Manual Operation Machine Controls 2. Work Lights Engine Starting Conditions: 4. Winch Out Activates winch out operation. • Operator must be in Seat 5. Winch In • Fasten Seat belt Activates winch in operation. • Cutter Wheel Throttle Lever is Off position 6.
  • Page 27 The operator must check for any active faults that have been detective on the Main Display Panel in the Fault Indicator screen. Consult your RAYCO Dealer or Service Technician for further instruction. The cab is designed with a Fresh Air / Heater / Air Conditioner system.
  • Page 28 Seat Belt during the weight adjustment. To prevent operator injury This machine was shipped from Rayco with a factory and damage to the seat, the setting for the driver’s weight installed seat belt. Consult your Rayco dealer for all must be checked and adjusted as necessary before the replacement parts.
  • Page 29 C275 Operation & Service Manual Operation REVISIONS THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RAYCO MFG, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT Seat Belt Adjustment Boom Control THE WRITTEN PERMISSION OF RAYCO MFG, INC. IS PROHIBITED.
  • Page 30 C275 Operation & Service Manual Operation DP600 Main Display Panel Items on the Main Display Screen: 1) Seat belt buckled, wipers on and 2-speed engaged. 2) Hydraulic Pressure monitor screen 3) Stump Cutter Engage 4) Fault Indicator Screen 5, 6 or 7) Engine Data screens...
  • Page 31 C275 Operation & Service Manual Operation DP600 Main Display Screen (continued) Engine Data Screen From the Main Display Screen, depress Item #5. to view the Engine Data Screen. To track or monitor fuel consumption, depress item #5 to reset the Fuel Used number after each refueling. This value displayed is the number of gallons used since the last reset.
  • Page 32 C275 Operation & Service Manual Operation Towing the Machine 6. Once the brakes have been released, the machine is ready to be towed a short distance. 7. Great care should be taken as not to damage the splines on the transmission shafts that were removed.
  • Page 33 C275 Operation & Service Manual Operation All situation requirements cannot be listed. Minimal towing machine capacity is required on smooth, level surfaces. On inclines or on surfaces in poor condition, maximum towing machine capacity is required. Block the tracks securely so that the machine cannot move.
  • Page 34 When each maintenance item is performed, a OR REPAIRS MADE TO THIS MACHINE WITHOUT record of the current service hours and the date WRITTEN CONSENT OF RAYCO MFG. WILL VOID should be made, and a note should also be made, THE PRODUCT’S WARRANTY, LIABILITY AND CER-...
  • Page 35 C275 Operation & Service Manual Maintenance 10 Hrs First 25 First 50 Every 100 Every 250 Every Every 1000 Every Service Interval: or Daily 500 Hrs Year Needed Air Cleaner - Check / Replace Cartridges check replace Air Cleaner Ejector Valve- Clean...
  • Page 36 C275 Operation & Service Manual Maintenance...
  • Page 37 C275 Operation & Service Manual Maintenance Maintenance Log Date of Service Machine Hours Description of Service/ Maintenance Notes 800.392.2686...
  • Page 38 C275 Operation & Service Manual Maintenance & F AYCO UBRICATION LUID PECIFICATIONS Rayco Lubrication & Fluid Specifications Engine Oil During the initial break-in period, the engine will consume more oil than usual. Check the engine oil level daily. ONLY USE CH-4 (or better) CLASSIFICATION OILS WITH A 10 TBA OR HIGHER.
  • Page 39 A synthetic 75W-140 or 80W-140 heavy duty GL-5 gear oil could also be used in warm climates to extend gear life. MWF Hydrostat Drive C275 Operation & Service Manual The Hydrostat drive is shipped with Mobil 1 synthetic engine oil, SAE 15W-50. Do not mix hydrostat and different lubricants! Maintenance The Differential Gearbox is shipped with 80-90W performance gear oil.
  • Page 40 Your Rayco machine is filled at the factory with Chevron Heavy Duty Phosphate Free Coolant formulated to meet the heavy-duty engine coolant specifications of TMC RP329 and ASTM D 6210. This coolant is manufactured from ethylene glycol and a highly effective, heavy duty corrosion inhibitor package that is phosphate free and contains nitrates and molybdates.
  • Page 41 C275 Operation & Service Manual Maintenance Torque Specifications Torque Specifications General Torque Information Mismatched or incorrect fasteners can result in damage or malfunction, or possible injury. Take care to avoid mixing metric dimensioned fasteners and inch dimensioned fasteners. Exceptions to these torques are given in the Maintenance Section, if necessary.

  • Page 42: Air Cleaner Ejector Valve- Clean

    C275 Operation & Service Manual Maintenance Accessing the Engine Enclosure Air Cleaner - Check/Replace To gain access to the filter cartridge, loosen the wing-nut and remove (6). The cover will then be free for removal. To remove the outer filter, pull on the filter and it will come off.

  • Page 43: Air Intake Piping- Check

    C275 Operation & Service Manual Maintenance Air Conditioning - Check • Stop on the slope and observe the machine slowly creep backward. Shallow slopes will not be enough to allow the machine to creep. • While observing the machine creep backward down the slope, apply the parking brake.

  • Page 44: Engine Coolant Level- Check

    C275 Operation & Service Manual Maintenance Engine Coolant Level - Check Engine Leaks - Check Check for leaks as described in the Engine Operation Manual. Engine Mounts - Check THIS IS A PRESSURIZED SYSTEM. NEVER OPEN THE RADIATOR CAP IF THE RADIATOR IS HOT! WAIT Check and tighten if necessary all engine mounts.

  • Page 45: Engine Valve Clearance - Check

    C275 Operation & Service Manual Maintenance Engine Valve Clearance - Check Element replacement frequency is determined by the contamination level in fuels. Fuel flow to the engine becomes The engine features a no-adjust overhead. restricted as the element gradually plugs with contaminants, •...

  • Page 46: Grease & Oil Buildup - Remove

    C275 Operation & Service Manual Maintenance Grease & Oil Buildup - Remove Turn the key switch to ON. The CHECK ENGINE & WAIT TO START indicator lights should come on for a few seconds NOTICE while they perform a self-test and should both turn off if system is okay.

  • Page 47: Hydraulic Oil Filters - Change

    C275 Operation & Service Manual Maintenance Pilot Filter The hydraulic pilot filter (3) is located in the enclosure forward of the fuel tank. To replace, remove the step and battery access panel. The hydraulic tank is integrated into the right side of the frame.

  • Page 48: Hydraulic Oil - Change

    C275 Operation & Service Manual Maintenance Hydraulic Oil - Change and motor cases to fill with fluid for instant lubrication at start-up. 5. Fill Pump and Motor Cases of the circuit through the NOTICE uppermost case drain ports. This gives both units instant lubrication at start-up.
  • Page 49 C275 Operation & Service Manual Maintenance 800.392.2686...

  • Page 50: Radiator Pressure Cap- Check

    Any alterations, modifications, add-ons or repair without the Radiator Pressure Cap -Check written consent of Rayco Manufacturing will void the product’s warranty, liability and certification. The cooling system is designed to use a pressure cap to prevent boiling of the coolant.

  • Page 51: Track Pad Bolts - Re-Torque

    C275 Operation & Service Manual Maintenance 2. Operate the machine back and forth in order to equalize In addition, check the M16 metric bolts fastening the drive the pressure. sprocket to the track drive gearbox using 235 ft-lbs (318 3. Recheck the amount of track sag, and adjust as Nm) torque wrench setting in a sequence that tightens them necessary.
  • Page 52 C275 Operation & Service Manual Service Main Electrical Schematic 40857 (COMM HOT) FRAME GROUND CABLE 24537-10 ENGINE BLACK GROUND GRY/WHT (LH TRACK PRESS) CABLE 24537-05 175 A GRY/BLK ALTERNATOR (RH TRACK PRESS) (LH PROP CHARGE PRESS (RH PROP CHARGE PRESS) (PILOT PUMP PRESS) (WORK FUNC.
  • Page 53 C275 Operation & Service Manual Service FRAME (CONSOLE GRD) GROUND GRY/WHT CUTTER WHEEL (LH TRACK PRESS) NEUTRAL SWITCH GRY/BLK (RH TRACK PRESS) (CW NEUTRAL SW) (LH PROP CHARGE PRESS) (MICRO OTHER) (DISPLAY GRD) BACK-UP PRESSURE (RH PROP CHARGE PRESS) SWITCH...
  • Page 54 C275 Operation & Service Manual Service Cab Electrical Schematic 41206...
  • Page 55 C275 Operation & Service Manual Service 800.392.2686...
  • Page 56 C275 Operation & Service Manual Service Hydraulic Schematic 806429 Page 1...
  • Page 57 C275 Operation & Service Manual Service 800.392.2686...
  • Page 58 C275 Operation & Service Manual Service Hydraulic Schematic 806429 Page 2...
  • Page 59 C275 Operation & Service Manual Service 800.392.2686...
  • Page 60 C275 Operation & Service Manual Service Hydraulic Schematic 806429 Page 3...
  • Page 61 C275 Operation & Service Manual Service 800.392.2686...
  • Page 62 C275 Operation & Service Manual Service O-RING CONNECTOR RAYCO MFG. FF6400-12-12 -12MORFS X -12MORB C275 O-RING CONNECTOR FF6400-12-16 HYDRAULIC ADAPTER KIT -12MORFS X -16MORB ITEM PART # DESCRIPTION ELBOW 90 DEG -12 FJLC X FF6500-12-12 -12 MJLC PLUG -4MOR COUNTERSUNK...
  • Page 63 C275 Operation & Service Manual Service CONNECTOR STR -04 FPT X FF5000-04-04 -04 FPT ELBOW 90 DEG -08FPT X 5504-8-6 -06FPT CONNECTOR STR -06 MPT X 4404-06-06 -06 BEADED TUBE CONNECTOR STR -05BARBED 205-104 X -04MPT CONNECTOR STR-04MP X 5404-04-04...
  • Page 64 C275 Operation & Service Manual Service O-RING CONNECTOR RAYCO MFG. FF6400-12-12 -12MORFS X -12MORB C275 O-RING CONNECTOR FF6400-12-16 HYDRAULIC ADAPTER KIT -12MORFS X -16MORB ITEM PART # DESCRIPTION ELBOW 90 DEG -12 FJLC X FF6500-12-12 -12 MJLC PLUG -4MOR COUNTERSUNK...
  • Page 65 C275 Operation & Service Manual Service CONNECTOR STR -04 FPT X FF5000-04-04 -04 FPT ELBOW 90 DEG -08FPT X 5504-8-6 -06FPT CONNECTOR STR -06 MPT X 4404-06-06 -06 BEADED TUBE CONNECTOR STR -05BARBED 205-104 X -04MPT CONNECTOR STR-04MP X 5404-04-04...
  • Page 66 C275 Operation & Service Manual Service A/C Schematic 41266...
  • Page 67 C275 Operation & Service Manual 800.392.2686...
  • Page 68 The Series 42 variable displacement pump is a compact, high power density unit, using the parallel axial piston/slipper concept in conjunction with a tiltable swashplate to vary Series 42 Axial Piston Pumps the pump’s displacement. Technical Information Track Drive Pumps Reversing the angle of the swashplate reverses the flow of fluid from the pump, and This machine is equipped with (2) Danfoss®-Danfoss series displacement (stroke) limiters located in the servo covers.
  • Page 70 Proper servicing of pumps and motors requires that ments. The following outlines show the locations of Series 42 Component and Port Locations pressure be measured and monitored at various the various gauge ports. The tables show the recom- points in the hydraulic circuit. The Series 42 pump mended gauge size and the fitting size for each port.
  • Page 71 Series 42 Adjustments and Minor Repairs Pump “Neutral” Adjustment The pump neutral adjustment sets the position of the servo piston and pump swashplate relative to the controlling mechanism. WARNING The following procedure requires the vehicle / machine to be disabled (wheels raised off the Pump "Neutral"...
  • Page 72 Series 42 Adjustments and Minor Repairs 4.10 System Check Relief Valves (High Pressure Relief, Charge Check, & Bypass Valves) The charge check, high pressure relief, and the loop bypass functions are all contained within the system check relief (SCR) valve assembly. This assembly may be removed for cleaning and installation of fresh With Bypass...
  • Page 73 Series 42 Adjustments and Minor Repairs 4.12 Loop Flushing Valve The loop flushing function consists of the loop flush- ing shuttle valve and the loop flushing relief valve. The Loop Flushing assemblies may be removed for cleaning and instal- Relief Plug lation of new O-rings.
  • Page 74 Series 42 Adjustments and Minor Repairs 4.11 Charge Relief Valve The charge relief valve may be removed for cleaning and installation of fresh O-rings. The pressure setting may be changed. However, note that the setting will vary for different charge flows which depends on charge pump size and pump speed.
  • Page 75 Series 42 Adjustments and Minor Repairs 4.13 Shaft Seal and Shaft Replacement Series 42 Adjustments and Minor Repairs 4.13 Shaft Seal and Shaft Replacement A lip type shaft seal is used in Series 42 pumps. This seal and/or the shaft can be replaced without major Retaining disassembly of the unit.
  • Page 76 Introduction CloseD CiRCuit In a closed circuit, hydraulic lines connect the main ports of the pump to the main ports Track Drive Motors of the motor. Fluid flows in either direction from the pump to the motor and back to the pump.
  • Page 77 Servo piston Maximum displacement Series 51 motors incorporate mechanical displacement limiter P101 195E limiters. You can set a specific displacement range by um displacement of the motor is set by a screw and spacers installed on limiting the travel of the valve segment/rotating group. The he servo piston.
  • Page 78 51C060-1 Two Position Control, N1NN Loop ?ushing shuttle valve Charge pressure relief valve Case drain “L1” 1.0625-12UN-2B -12UN-2B] Speed pick-up Alternate position min. angle stop Case drain “L2” Split ?ange boss “A”+”B” adjustment Gage port “M1” 1.0625-12UN-2B DN 19 typ II 40 MPa series -12UN-2B] System pressure “A”...
  • Page 79 Series 51 and 51-1 Motors Service Manual Troubleshooting sluggisH system Check Cause Corrective action Control orifices Blocked or restricted orifice will cause sluggish Remove, inspect and clean all orifices. Ensure the response. Orifices installed to the wrong appropriate orifices are installed. locations will cause PCOR control to be sluggish.
  • Page 80 Series 51 and 51-1 Motors Service Manual Troubleshooting exCessive noise oR vibRation Check Cause Corrective action Oil level in reservoir Insufficient hydraulic fluid will cause cavitation. Fill reservoir to proper level. Air in system Air bubbles may lead to cavitation. Look for foam or bubbles in reservoir.
  • Page 81 Series 51 and 51-1 Motors Service Manual Troubleshooting low outPut toRque Check Cause Corrective action System pressure Low system pressure at motor reduces output Measure system pressure at the motor. If the torque. pressure limiter or relief valve setting is low, increase setting to the proper level.
  • Page 82 oveRview (continued) adjusting charge pressure Series 51 and 51-1 Motors 1. Loosen the lock nut using a 1 hex wrench. Service Manual 2. Turn the adjustment plug with a large screwdriver or 1 Adjustments  WARNING Incorrect charge pressure Clockwise rotation of the plug increases the setting, and co settings may result in the decreases the setting.The charge pressure setting will be re oveRview...
  • Page 83 Series 51 and 51-1 Motors Service Manual Series 51 and 51-1 Motors Minor repair Service Manual Minor repair sHaft seal Cartridge flanged motors RePlaCement Disassembly (continued) 1. Thoroughly clean all external surfaces before disassembly. sHaft seal Cartridge flanged motors RePlaCement Disassembly 2.
  • Page 84 7. Remove the shaft seal protection sleeve. Series 51 and 51-1 Motors looP flusHing Disassembly sHuttle valve 1. Thoroughly clean all external surfaces before disassembly. Service Manual Minor repair 2. Using an 11/16 inch hex wrench, remove the two hex plugs (G20) from the endcap. 3.
  • Page 85 Service Manual Minor repair r r i v i t i l t a l l j e l CHaRge Relief valve orificed style (continued) Disassembly r r i i l i 1. Thoroughly clean all external surfaces before disassembly. i a t a l l p l i...
  • Page 86 Track Drive Gearbox PMC 3000 is a travel drive unit, expressly designed to be used PAY ATTENTION ! : Under normal working conditions for the application on tracked units requiring the gearbox shall never exceed a temperature of 100°C. If this maximum constructive stiffness .
  • Page 87 Draining For oil-drainig operation, follow these steps: Maintenance: • step 5 : screw in order the level plug (2) and the filling plug Respect the enviroment! The routine maintenance includes only the timely replacement (1). step4 : screw in order the level plug •...
  • Page 88 Air Conditioning System R-8545 BACK WALL 2) Turn the ignition switch to the “On” position HD Air Conditioner Unit/Heat and place the fan speed switch on the highest Compact and powerful are the best words to describe the position. R-8545. Inch for inch the R-8545 has the highest output of any 3) Place the Heat-A/C switch to the “A/C”...

  • Page 89: Specifications

    . step2 : unscrew both the front plugs • (8) and leave out the exhaust oil. step3 : follow the steps described at • C275 Operation & Service Manual pag.18 to re ll the gearbox. Specifications Fig 3 Front Gearbox Oil drain plug (2)
  • Page 90 C275 Operation & Service Manual...
  • Page 91 C275 Operation & Service Manual Fluid Capacities CAPCITY TYPE ENGINE OIL 17 QTS See Chart In Engine Manual FUEL 95 GAL Ultra Low Sulfur Diesel 25 GAL HYDRAULIC AW HVI Hyd Oil 46 w/System 35 GAL Phosphate Free HD Antifreeze (ASTM D6210 Compli-...

  • Page 92: Maintenance

    SERVICE PARTS SERVICE FILTERS TRACK ASSEMBLY PARTS DESCRIPTION PART # QTY. DESCRIPTION PART# Fresh Air Filter 762823 Front Idler Assembly 801719 Foam Cab Filter 802762 Bottom Roller 803807 Engine Air Filter-Primary 806180-10 Top Roller 801772 Engine Air Filter-Secondary 806180-11 Track (Single Bar) 801838 Primary Engine Fuel Filter 806180-7...

  • Page 93: Warranty

    Rayco product are those set forth on this page. In machine, and all warranty considerations are the sole no event will the dealer and or Rayco be liable for incidental responsibility of the manufacturer.
  • Page 94 Read and understand all instructions before attempting to operate this machine. This manual should be readily available for reference at all times. Additional copies of this manual may be purchased. Contact your Authorized Rayco Dealer or Rayco Manufacturing Inc. RAYCO Manufacturing, Inc.

Table of Contents