Mitsubishi MELSEC-Q Series User Manual page 34

4 VERIFYING THE OPERATION OF THE WEB FUNCTION USING
A SAMPLE SCREEN
4 - 10
(3) Setting items
The following explains the setting items on the Remote RUN/STOP screen.
(a) Connection target (character string)
Specify the IP address or host name of the connection target Ethernet
module.
(Example) To specify using the IP address, enter 10. 97. 85. 200.
(b) Target PLC (selection)
Select the target programmable controller for remote RUN/STOP operation.
To perform remote RUN/STOP to a single CPU, specify the control CPU.
(c) Operation mode (selection)
Select whether or not to execute remote RUN forcibly.
1) Do not execute forcibly
Does not perform remote RUN when remote STOP is being executed
from other external device.
2) Force execution
Performs remote RUN even if remote STOP is being executed from
other external device.
(d) Clear mode (selection)
Specify clear (initialization) processing of QCPU's device clear when
starting QCPU calculation by remote RUN.
1) Do not clear
Does not clear the device memory.
2) Clear all except latch
Clears the device memory outside the latch range.
3) Clear all
Clears all device memory including the latch range.
MELSEC-Q
4 - 10