Rpn Correct Menu; Executing Auto Detection; Correction Mode Settings - Sony MCC-3000MT Service Manual

3-4.

RPN CORRECT Menu

The RPN CORRECT menu enables various operations such as manual registration, deletion and automatic detection of
the RPN compensation point.
Note
Before executing the RPN CORRECT menu, check that the Inversion item on the PICTURE PROFILE menu is set to
Normal. Otherwise, the menu cannot be executed normally.
For the PICTURE PROFILE menu, refer to the Instructions for Use.
RPN Manual Registration Procedure
1. Set the Inversion item of PICTURE PROFILE menu to Normal.
2. Set the Video Format to HQ 1080/60i.
3. To facilitate viewing the RPN position on a monitor screen, set the Readout Mode to Frame.
4. Set the lens iris to CLOSE.
5. Adjust gain and black level to the settings that facilitate viewing the RPN position on a monitor screen.
6. Set Channel to the RPN color that is going to be registered.
7. Set Cursor to On.
8. Move the crosshair cursor to the RPN that is going to be registered by using Cursor H Position and Cursor V
Position.
When the crosshair cursor is moved on top of the desired RPN, the RPN becomes invisible.
9. Set Correction Mode to Concealment.
10. Execute the Record.
Note
When RPN Record is attempted, if the RPN registration of a pixel fails at a specific address due to a problem with the
small interval between the current and previous registered RPN spots, the screen shows the message "NG: Adjacent
Pixel".
3-4-1.

Executing Auto Detection

• The Auto Detection menu enables automatic detection of RPN point.
• When the Auto Detection menu is selected, the Execute and Cancel choices appear. Selecting Execute starts RPN
Auto Detection.
• The RPN point that is detected by the Auto Detection is added to the RPN correction point.
Note
Auto Detection cannot be executed under the following settings.
• When Video Format other than HQ 1080/60i is selected.
• When electronic shutter setting (Shutter → Mode setting) is set to SLS or EXSLS.
Change the settings to execute Auto Detection.
3-4-2.

Correction Mode Settings

• The Correction Mode menu enables selection of the RPN correction mode for a pixel when the pixel is registered
by manual registration of RPN.
• The Correction Mode selecting Concealment and Compensation.
• For the manual registration of RPN, select Concealment.
MCC-3000MT
3-5