Safety Information; Operator Requirements; Site Commissioning - ABB ConVac Installation And Operation Instruction Manual

S A F E T Y I N F O R M A T I O N / O P E R A T O R R E Q U I R E M E N T S / S I T E C O M M I S S I O N I N G
—
IV. Safety information
All installation, operation and maintenance must
be performed by specially trained personnel who
have a detailed understanding of the characteristics
of the equipment.
This manual and other necessary information can
be provided at any time during the operation
—
V. Operator requirements
Check and confirm that the operating parameters
of the equipment do not exceed their rated
values.
According to this manual and the requirements of
the equipment label, the operator must:
• Read this manual carefully and completely
• In-depth knowledge of equipment installation,
construction and operation and clear
understanding the possible impact of each
operation
• Qualified and authorized to comply with safety
—
VI. Site Commissioning
ABB has professional after-sales service staff,
who can provide quality on-site service, technical
guidance and consultation for installation,
Strictly follow the requirements in this manual.
Verify that safety code standards and installation
conditions are met during the installation,
operation and maintenance phases.
regulations and local labor standards，and to
perform the equipment power on, power off,
grounding and check the circuit and other
operations
• Qualified and authorized to operate, maintain
and repair the equipment
• Have received training on how to properly use
protective equipment, such as insulated gloves,
safety helmet, goggles, face masks, fireproof
clothing, etc. within the scope of safety
regulations and local labor standards.
• First aid training
inspection, overhaul and maintenance of
equipment.
7