Replacing Consumable Parts - Canon imageFORMULA DR-6030C User Manual

Replacing Consumable Parts

Follow the relevant procedure to remove and attach the pickup roller,
feed rollers and retard roller when you clean or replace them.
IMPORTANT
Feed rollers are consumable parts. When the rollers start to wear
out, paper jams and misfeeds may occur more often. When this
happens, buy a exchange roller kit, and replace the pickup roller,
feed rollers and the retard roller.
CAUTION
• Turn ON the power to the scanner to remove or attach the pickup
roller. Be careful when working on the scanner when the power is
ON.
• Do not use excessive force when removing or attaching the
rollers. Doing so may damage them.
When the rollers being used have fed more than 250,000 pages, a
roller replacement message is displayed on the computer. Buy a roller
replacement kit and change the pickup roller, feed rollers and the
retard roller.
IMPORTANT
• If misfeeds happen often, check the rollers for wear, and replace
them if necessary before the message is displayed.
• Be sure to reset the counter after replacing the
counter" on p. 55
• Contact your local authrized Canon dealer or service representative
for information about the exchange roller kit (pickup roller, feed
rollers and retard roller).
Opening and closing the upper unit
Opening the Upper Unit
Pressing the OPEN knob from both sides, raise the upper unit.
The pickup roller is located in the middle of the upper unit. Do not
hold the protrusion on the upper unit when you open it. Doing so
may deform the pickup roller or cause a feeding error.
Be sure to open the upper unit until it stops. If it is not opened all the
way, the shading boards cannot come out.
Closing the Upper Unit
Be sure that the upper unit is completely closed by pushing on both
edges with both hands until you hear a click.
rollers."Resetting the
Do not force the upper unit to close. Doing so may damage the
scanner.
50
CAUTION
IMPORTANT
IMPORTANT