Powering Down The Server For Shipment Or Storage - Hitachi NAS Platform 4000 Series Hardware Reference Manual

Amber
Slow green flash (every three
seconds)
Medium green flash (every .8
seconds)
Off
Solid green
Slow green flash (every three
seconds)
Medium green flash (every 1.3
seconds, with the server online)
Medium green flash (every .8
seconds)
Fast green flash (5 times per second) Server is booting.
6. If the green LED is flashing 5 times per second, plug in the serial cable.
If the terminal screen is generating output, let the process complete.
■
If the terminal screen is blank, press the Reset button.
■

Powering down the server for shipment or storage

Follow this procedure whenever a server is to be powered down and will be left off for
more than a day. If the system is being restarted or power-cycled, this procedure is not
required.
Chapter 6: Rebooting, shutting down, and powering off
Hitachi NAS Platform and Hitachi Unified Storage Series 4000 Hardware Reference
Table 22 Server status - model HNAS 4040
Server status LED
Table 23 Server status - models HNAS 4060, 4080, and 4100
Server status LED
Note: Pulling the power cord from the server is not recommended.
Do not pull the power cord unless it is absolutely necessary. First,
complete the steps above.
Powering down the server for shipment or storage
Meaning
Critical failure and server is not
operational.
System has been shut down and you can
remove the power.
Server needs attention, and a non-critical
failure has been detected. For example, a
fan or power supply has failed.
Normal operation.
Meaning
System has rebooted and the server is
online.
System has been shut down and you can
remove the power.
No enterprise virtual server (EVS) residing
on the server.
Server is available.
84