Setting Up The Heartstart; How To Set It Up The First Time - Philips HeartStart Home Owner's Manual

SETTING UP THE HEARTSTART

HOW TO SET IT UP THE FIRST TIME

It is easy to set up your HeartStart. Just
follow these steps.
1
Check the contents
Home Defibrillator box.
2
Take the HeartStart out
6
of the HeartStart
of its red case.
NOTE: Leave the pads cartridge installed. To
avoid drying out the adhesive pads, do not
open the cartridge until you need to use the
pads in an emergency.
3
Pull out the red tab
to start the automatic
battery self-test.