[ VIII Disassembly Procedure ]
3. Drain pan
Be careful removing heavy parts.
1. Remove the control box cover (A) with procedure [1]-1.
2. Remove the fixing screws on the front plate (D), (E) to re-
move it. (Fig. 4)
3. Remove the fixing screws on the control box (F), to re-
move it. (Fig. 5)
4. Removing the drain pan
(1) Pull out the drain pan in the direction of the arrow 1.
(Fig. 6)
Note:
Drain the water out of the drain pan before removing
it.
To avoid dew condensation, use insulated screws in
the places marked with circles in Fig. 7.
HWE18170
(E)
Fig.4
Fig.5
Fig.6
(a) Insulation material
(D)
Fig.7
- 24 -
(D)
(F)
1
(a)
GB