Table of Contents
Advertisement
4.2 Servicing tools overview 2
9
13
Pos.
Designation
9
Separator puller tool
10
Inner bearing puller tool
11
Bearing puller tool
Insert for roller bearing
12
Mandrel press
13
Protective tool for mandrel
press
14
Press tool for motor housing
15
Torque wrench
16
Pinion shaft holder tool
1332 - 001 - 04.03.2021
10
14
Used for
To replace the shaft sleeves for the drill spindle. Re-
To replace the shaft sleeves for the drill spin-
fer to
dle on page 18 . To remove the drill spindle bear-
ing. Refer to
16 .
To remove the middle cover bearings. Refer to
remove the needle bearings from the middle cover
on page 23 .
-
To disassemble the rotor. Refer to
the rotor on page 26 .
To install and remove product parts.
To install and remove product parts.
To assemble the stator. Refer to
stator on page 28 .
To control the tightening torque of the safety cou-
pling. Refer to
25 .
To assemble the pinion shaft. Refer to
the pinion shaft on page 25 .
11
15
To remove the drill spindle on page
To disassemble
To assemble the
To assemble the pinion shaft on page
12
16
Order No./Source
598 94 78-01
To
531 14 32-01
598 95 44-01
531 14 33-01
598 95 45-01
598 95 53-01
598 95 55-01
531 14 34-01
531 14 36-01
To assemble
531 14 37-01
Servicing tools - 7
Advertisement
Table of Contents
