Advertisement
Quick Links
Installation Instruction
TOWN GLOW
Caution: Mounting to be done using M8 Grub Screw(3x).
Warranty void if Earthing is not connected.
CAUTION
1. Ensure Earthing is connected in right manner.
2. Cable Entry gland should be properly tightened.
3. Product should be operated between 120-270V A.C.
4. Use Surge protection (upto 10kV) to protect against surges/Use Type B+C surge type SPD in
distribution box to arrest switching and lighting surges.
5. The light source of this luminaire is not replaceable, when the light source reaches
its end of life the whole luminaire shall be replaced.
6. Carefully re-install all seals and gaskets when servicing the luminaire.
FAILURE OF PRODUCT DUE TO NON COMPLIANCE TO ANY OF THE ABOVE, VOIDS WARRANTY
All the pictures in the MI sheet are representative only and may vary from the Actual Product.
Signify Innovations India Limited
Outdoor Luminaire
TOWN GLOW
Type
Lamp
Voltage
IP Classification
Net Weight
Max. Projected Area
CCT
Application
IP-66
All the pictures in the MI sheet are representative only and may vary from the Actual Product.
Installation Instruction
: BGP300
: LED
: 240 V, 50 Hz
: IP 66
: 4 kg Approx
: 0.16 m²
: 5700 K, 4000K, 3000 K
: Outdoor only
ta
IK-10
35
Outdoor Luminaire
Advertisement
Related Manuals for Philips BGP300
Summary of Contents for Philips BGP300
- Page 1 TOWN GLOW Outdoor Luminaire Caution: Mounting to be done using M8 Grub Screw(3x). Warranty void if Earthing is not connected. Type : BGP300 CAUTION Lamp : LED 1. Ensure Earthing is connected in right manner. 2. Cable Entry gland should be properly tightened.
- Page 2 Fix the driver tray as shown in the figure. Make the electrical connections in 3 pole connector For pre-wired luminaire, directly connect it to the Take the Luminaire out of the packing Box. Care to be taken that no force to be applied on as per the LNE marking.