Table of Contents
Advertisement
Installation
Insert the modem driver diskette into the diskette drive and
7.
follow the instructions on the screen install the driver.
Click on Set Configuration Manually to set the COM port
resources. The following resource settings are suggested:
Item
Modem I/O Address
COM I/O Address
COM IRQ
If these settings are in conflict with other devices, you can
select other settings based on the following conditions:
COM Port
COM2
COM3
COM4
You can change the the setting by clicking in the Setting
based on: combo box to make it match a setting from the
table above.
Note: Note down the resource settings for future reference.
8.
Click on OK to install the driver.
9.
Follow the instructions on the screen
6
Suggested Setting
100-107
2F8-2FF
3
I/O Address
2F8-2FF
3E8-3EF
2E8-2EF
Advertisement
Table of Contents
