4.14 ATMOS CEC Disable
1) Go to "ATMOS CEC DISABLE" and Press "" or "" button to select '0' or 'A'
2) After select the option that you wish, press "Home" to confirm the selection.
ATMOS_CEC_DISABLE (EEPROM 0x30A0)
Data : [0/A] Default : 0
Purpose : Data [A] is able to skip Atmos judgment
CEC<Report Short Audio Descriptor> that comes
from the amplifier, and set Atmos EDID as the
service c/m to an amplifier that supports Atmos but it
reply NO Atmos.
Remarks :
1) This data is not changed by software update or
AC off/on, only change from service menu.
2) Need to turn AC off/on after change setting in
order algorithm to take effect.
Option
Execution Effect
The TV checks whether
HDMI1(ARC) is connected to an
0 (default)
amplifier that support ARC &
Atmos or not, and sets either
Atmos EDID/ Non Atmos EDID.
The TV skip Atmos checking
when HDMI1(ARC) is connected
A
to an amplifier that support ARC
and set Atmos EDID even when
amplifier doesn't support Atmos.
136
SYS SET