Maintenance - Electrolux 7GRGDGC0P Manual

VIII. MAINTENANCE

1. MAINTENANCE

All the components requiring maintenance are accessible
from the front of the appliance, after removing the control
panel.
1.1 BRIEF TROUBLESHOOTING GUIDE
Even with normal use, malfunctions can occur.
The pilot burner does not light
Possible causes:
• Insufficient pressure in gas pipes.
• Faulty gas valve.
The pilot burner goes out when the igniter knob is released
Possible causes:
• The pilot burner is not heating the thermocouple sufficiently.
• Faulty thermocouple.
• The gas valve knob is not being pressed enough.
• Lack of gas pressure at the valve.
• Faulty gas valve.
The pilot burner is still lit but the main burner does not light
Possible causes:
• Loss of pressure in gas pipe.
• Blocked nozzle or faulty gas valve.
• Burner with gas outlet holes clogged.
INSTRUCTIONS FOR REPLACING COMPONENTS
(to be carried out only by a specialised installer)
VALVE
• Remove the knobs and control panel.
• Unscrew the pilot and thermocouple pipe.
• Unscrew the gas inlet and outlet connections.
• For installation carry out the same procedure in reverse
order.
THERMOCOUPLE, PILOT BURNER ASSEMBLY
• Remove the knobs and control panel.
• Unscrew the pilot and thermocouple pipe and remove it.
• Replace the component.
GRILL MAIN BURNER
• Remove the knobs and control panel.
• Remove the clamp fixing the burner to the gas pipe and
nozzle holder.
• Remove the burner and replace it.
For installation carry out the same procedure in reverse order.
1.2. MAINTENANCE SCHEDULE
• It is advisable to have the appliance inspected by an
authorised person at least every 12 months. For this
purpose, it is advisable to stipulate a servicing contract.
AUSTRALIA
For service and spare parts, please contact:
Electrolux - Tom Stoddart Pty Ltd
Zanussi - JL Lennard Pty Ltd
23