Grizzly H8372 Instructions

Introduction
this high quality spotting scope is great for view-
ing wildlife and down range targets.
Inventory
after all the parts have been removed from the
box, use the Parts Breakdown on the back of
this page to inventory the parts.
Viewing the sun or any source of strong light
with this scope could cause temporary or
permanent damage to the eyes. Never use
this scope to view sources of strong light.
Specifications
Magnifying power ........................................ 9–27
objective lens diameter ........................... 50mm
ocular angle ...................................................45°
tripod Mount thread ..................................
Minimum Viewing distance ......................... 20 ft.
Weight w/o tripod, Caps, or Case ...........1
Operation
1. attach spotting scope to tripod.
2.
unscrew eyepiece lens cap from rubber eye-
cup, and remove objective lens cap.
Copyright © NoVEMBEr, 2007 By grizzly iNdustrial, iNC., rEVisEd dECEMBEr, 2013 (st)
WARNING: NO PORTION Of THIS MANUAL MAy BE REPRODUCED IN ANy SHAPE
OR fORM WITHOUT THE WRITTEN APPROVAL Of GRIzzLy INDUSTRIAL, INC.
VARIABLE POWER
rubber
Eyecup
3.
⁄ "-20
1
4
⁄ lbs.
1
4
4.
#ts10175 priNtEd iN ChiNa
MODEL H8372
SPOTTING SCOPE
INSTRUCTIONS
tripod Mount
figure 1. Model h8372 components.
Note: The edge of the rubber eyecup (see
Figure 1) can be folded down to view the full
field when wearing eyeglasses.
to focus, slowly rotate focus ring until object
becomes clear.
Note: The minimum viewing distance is
approximately 20 feet.
Change magnification by rotating zoom ring.
Note: You may need to re-focus after chang-
ing magnification.
zoom
ring
Focus
ring
sun
shade
objective
lens