Table of Contents
Advertisement
Contents
1.
Part Names
2.
Basic Operation
3.
Menu Operation
4.
USB Media
5.
Connecting Other
Devices
1.
Connecting 8K Output-
compatible
Device/Quad-screen
display（4K or less)
5.
Connecting 4K Output-
compatible Device
7.
Viewing HDR Video
(INPUT1, INPUT7,
INPUT8)
9.
Using the HDMI CEC
11.
Connecting Recorder,
Player, etc.
21.
Connecting Audio
Device
22.
Connecting PC
6.
Operating the Monitor
Using a PC (IP control)
7.
Troubleshooting
＞
Connecting Other Devices
＜
Connecting Recorder, Player, etc.
For a device with an HDMI output terminal (INPUT 1 / 2 / 3 / 4)
Supported video signals
• 3840 × 2160 (24Hz/25Hz/30Hz/50Hz/60Hz
1080i, 576p, 576i, 480p, 480i, VGA, SVGA, XGA, WXGA, SXGA, SXGA+
*Only INPUT 1 supports for 4K50p/60p (4:2:2, 4:4:4) signals.
Supported audio sound signals
*1
*2
• Type: Linear PCM (2ch)
, AAC
, Dolby Digital
sampling frequency: 48kHz / 44.1kHz / 32kHz
*1 Only Linear PCM is supported (INPUT 7) during viewing 8K video.
*2 Since digital broadcasting makes efficient use of limited radio waves, videos or sounds are compressed before being transmitted.
AAC is an audio compression format that is used in digital broadcasting, and that, in spite of a high compression ratio, can achieve high sound quality and even support
multi-channel audio (5.1 channel surround, etc.).
NOTE
• If a device that is not HDMI CEC compatible is connected to the monitor, it may turn on and off, or switch channels on its own. In this case, set "CEC control" to "Off".
(page 3-31)
*
), 1080p (24Hz/30Hz/50Hz/60Hz), 720p (30Hz/50Hz/60Hz),
5-14
Advertisement
Table of Contents
