Putting The Spare Wheel Back In Place - CITROEN C4 Spacetourer Handbook

Putting the spare wheel back in
place
F Put the wheel back in its housing.
F Loosen the nut on the bolt by a few turns.
F Position the fastening device (nut and bolt)
in the middle of the wheel.
F Tighten fully until the central nut clicks to
retain the wheel correctly.
F Put the box back in place in the centre of
the wheel.
Since the width of the spare wheel is
smaller than the width of the wheels of
the vehicle, in the event of a puncture, the
punctured wheel must be stored in the boot.
Spare wheel
Procedure for changing a wheel with
a damaged or punctured tyre for the spare
wheel using the tools provided with the vehicle.
Scan the QR code on page 3 to view
explanatory videos.
Access to tooling
(Depending on version. The full set of tools is
supplied with the spare wheel.)
In the event of a breakdown
One part of the tools can be accessed from the
boot.
The immobilisation chock 2 as well as the
wheelbrace extension 6 are stored in the right-
hand section of the boot sill trim.
The wheelbrace 1 and the towing eye 7 are
stored in the left-hand section of the boot sill
trim.
The rest of the tools, the jack 3 and the wheel
bolt cover removal tool 4, are stored in a box
attached to the spare wheel.
The assembly is secured under the vehicle by
means of a winch carrier system.
8
213