Samsung NX-308 Programming & Installation Manual page 45

Defines which stations will ring when the door phone button is pushed.
1. Press # key.
PROGRAMMING is displayed.
2. Dial 63.
Display shows DOOR RING ASSIGN and current data is displayed.*
3. Press DSS button of stations to receive door phone ringing. (Maximum of eight stations).
4. Press # key.
(* Default: Ring stations 12345678)
# 67 Camp-On Tone Interval
Adjusts the time interval between camp-on reminder tones.
1. Press # key.
PROGRAMMING is displayed.
2. Dial 67.
CAMP ON TONE is momentarily displayed, then the current timer value.*
3. Enter new data as two digits.
00: A single ring tone at the beginning of a camp-on
10-99: Duration of time between tones
4. Press # key.
(* Default: 00)
Note: Setting this value higher than Hold/Camp-on Recall timer (# 52) will cause only a single ring
tone.
# 70 Attendant Assignment
Defines which station is to act as the Operator's station.
1. Press # key.
PROGRAMMING is displayed.
2. Dial 70.
Display shows the current attendant station number.*
3. Press the desired DSS key for new attendant.
4. Press # key.
(*Default Operator station: 1)
Note: Operator places system into night mode by pressing DND key. If a single line phone is
assigned attendant function the system cannot be placed into night service.
DND feature is not allowed on the attendant keyset.
43