(5) Press the [F9] (YES) key. The loading of the program starts.
(6) When loading is completed, "Load Complete. Insert the OPERATING PROGRAM 2." is indicated
on the display, and the function key indications change as follows.
F1
(7) Insert the OPERATING PROGRAM 2 (control panel software) to the floppy disk drive, and press the
[F10] (EXEC) key. The loading of the program starts.
(8) When loading is completed, "Load Complete. Insert the OPERATING PROGRAM 3." is indicated,
and the function key indications change as follows.
n
Because the OPERATING PROGRAM 3 is not used in the HDS-7150, press the [F10] (EXEC) to
end the installation of the program.
F1
HDS-7150/7100
F2
F3
F4
F5
F2
F3
F4
F5
EXEC
F6
F7
F8
F9
F10
EXEC
F6
F7
F8
F9
F10
HDS-7150
9-2. Installation of Program (HZS-7040)
9-5