Table of Contents
Advertisement
CRS1
Step 5: Remove the open switch lever.
Step 6: Remove the OC gear assy followed by the OC
gear spring as arrow shown.
Caution: Ensure the OC gear assy and OC gear spring
are handle properly and keep them in a safe place.
Step 7: Press the claw, push backwards and remove the
trigger slide plate as arrows shown.
Step 8: Use a minus screwdriver slot into the gap and
push out the tray lock lever as arrows shown.
Caution: Do not exert force as it may cause damage to
the tray lock lever.
54
Advertisement
Table of Contents
