Step 2 Changing Print Settings For A Job With The Imagepress Server - Canon imagePRESS C10000VP Practical Manual

Step 2 Changing Print Settings for a Job with the imagePRESS Server

If you still have the same problem after you follow the procedures in step 1 "Eliminating the Basic Causes, " change the
print settings in Command WorkStation on the imagePRESS Server as follows� However, the adjustments described in
this section change overall colors� If you want to change the colors of photos only, see the following�
"How to Print Clear Photos" (p� 13)
• Printing a Spot Color Accurately (p� 4)
• Changing the Colors of an Entire Page (p� 6)
Printing a Spot Color Accurately
▀
Try this procedure if you cannot reproduce a specified spot color� Registering spot colors in Command WorkStation
ensures consistency and accuracy in color reproduction�
1
Click the [Device Center] tab in Command WorkStation → [Resources] → [Spot Colors]�
2
Click [New] → [Spot Color]�
4 4
imagePRESS C10000VP/C8000VP imagePRESS C10000VP/C8000VP