Information For Starting Up The System; System Configuration; Figure 4-1 System Configuration - Hitachi IR.LINK User Manual

4 OPERATION

4.1 Information for Starting Up the System

Use the IR.LINK system as a tool for starting and setting the IR.LINK module.
The IR.LINK system is a man-machine tool that sets the information required for communication
between the IR.LINK module and the IR.Station module.

4.1.1 System configuration

S10V LPU unit or
S10mini CPU unit
Only one IR.LINK module can be installed.
For the S10mini series, install option modules from the leftmost slot so that the
I/O module may not exist between the CPU module and an option module and
any empty slot may not exist between the option modules.
For the S10V series, there is no constraint on the mounting position and empty
slot.
When installing the J.NET module (model: LQE040 or LQE540) or J.NET-INT
module (model: LQE045 or LQE545) and the IR.LINK module simultaneously,
install the IR.LINK module as the sub-setting. When installing only the
IR.LINK module, install it as the main setting.
IR.LINK module (main)
IR.Station module
8-slot I/O unit

Figure 4-1 System Configuration

NOTICE
4-2
LQE546
IR.LINK
MODU
TX
No.
N1
RX
ERR
BIT
RATE
No. Module
0 Main module
1 Sub-module