9.61 T1 Bank ASSY
(1) Remove the Tray lock cam and Tray lock spring from the Lower cover.
(2) Turn the Main body upside down.
(3) Remove the screw (TAPTITE CUP B M3x10) and remove the Tray FG wire.
(4) Remove the three screws (TAPTITE CUP B M3x10) and remove the Lower cover
frame from the Lower cover.
Assembling Note: When tightening the four screws (TAPTITE CUP B M3x10), tighten
TAPTITE CUP B M3x10
Lower cover
Lower cover
Fig. 3-195
them in the order shown in the figure.
Tray FG wire
Lower cover frame
1
3
Fig. 3-196
Tray lock spring
Tray lock cam
2
4
3-144
TAPTITE CUP B M3x10
Confidential