Installing The Multipurpose Blade Or Dough Blade - KitchenAid KJA09 Series Manual

USING THE FOOD PROCESSOR
NOTE: For ease of assembly, install the desired blade or disk before attaching
the work bowl cover�
To attach the work bowl cover, hook
the lid hinge into the handle hinge
3
on the work bowl and close the
cover�

INSTALLING THE MULTIPURPOSE BLADE OR DOUGH BLADE

Place the blade on the drive adapter�
1
Rotate the blade so it falls down to
the base of the adapter�
W11338648B.indb 11
Once the work bowl cover is closed,
4
push the lid hinge down into the
locked position�
NOTE: Your Food Processor will not
operate unless the work bowl cover is
fully closed and the work bowl is properly
seated on the base�
Install the work bowl cover, and be
2
sure the lid latch is pushed down to
the locked position�
USING THE FOOD PROCESSOR | 11
4/17/2019 7:14:50 PM