Download Print this page

Advertisement

Quick Links

SHB2505

Advertisement

loading

Summary of Contents for Philips BASS+ SHB2505

  • Page 1 SHB2505...
  • Page 6 blue blue Please note that the right earpiece is the “Master device” and the left Earpiece is the “Slave” device. Before the rst time use, put them into charging case to fully charge for 3 hours. Take both earpieces from the charging case, the earpiece will power on automatically.
  • Page 7 “ Pairing". Then, there will be a voice” R channel” on right earpiece. Turn on the Bluetooth function on your device, search for" Philips SHB2505” tap to connect. ( Please refer to P.6 ) There will be a voice “Connected”...
  • Page 8 Take both earpieces from the charging Take both case, the earpiece will power on and earpieces reconnect automatically. from the If no device is connected, the charging case, the earpieces will automatically turn o earpiece after 3 mins will power on and reconnect automatically...
  • Page 9 white /Left will ashe 2 times per 3 mins /Left /Left once. Battery LED indicator on headset status It will show a battery indicator on Bluetooth device after connected to headset. /Left white Battery LED indicator on Charging case While charging earbud, Blue LED will light on One LED will light on for 0-25% power Two LED will light on for 25-50% power...
  • Page 10 Battery LED indicator on Charging case with USB cable While charging earbud, Blue LED will light on One LED will ash per second for 0-25% power Two LED will ash per second for 25-50% power Three LED will ash per second for 50-75% power Put both earpieces back to charging case.
  • Page 11 , AAC...
  • Page 15 put both earpieces back to charging case for 5 seconds and thak them out. put both earpieces back to charging case for 5 seconds and thak them out. and Left...
  • Page 16 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.