AEG FEE83701PM User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Dishwasher
  5. FEE83701PM
  6. User manual

AEG FEE83701PM User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

FEE83701PM
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Related Manuals for AEG FEE83701PM

Summary of Contents for AEG FEE83701PM

  • Page 1 FEE83701PM User Manual Dishwasher USER MANUAL...

  • Page 2: Table Of Contents

    Products must be used, installed and operated in accordance with this manual. You may not be able to claim on the AEG manufacturer’s warranty in the event that your product fault is due to failure to adhere to this manual.

  • Page 3: Safety Information

    ENGLISH Environmental information Subject to change without notice. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage.

  • Page 4: Safety Instructions

    & breakfast and – other residential type environments. Do not change the specification of this appliance. • The operating water pressure (minimum and • maximum) must be between 0.5 (50) / 8 (800) bar (kPa) Obey the maximum number of 15 place settings.
  • Page 5 °C. cable. • Install the appliance in a safe and suitable place that meets installation requirements. www.youtube.com/electrolux www.youtube.com/aeg How to install your AEG Semi Integrated Dishwasher 2.2 Electrical connection WARNING! WARNING! Dangerous voltage. Risk of fire and electric • If the water inlet hose is damaged, shock.

  • Page 6: Product Description

    • Disconnect the appliance from the • Remove the door catch to prevent mains supply. children and pets to get closed in the • Cut off the mains cable and discard it. appliance. 3. PRODUCT DESCRIPTION Ceiling spray arm...

  • Page 7: Control Panel

    ENGLISH 4. CONTROL PANEL On/off button Option button Program button Indicators Programme indicators Start button Display Delay button 4.1 Indicators Indicator Description Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. It is always off while the programme operates. Washing phase indicator.

  • Page 8: Programmes

    5. PROGRAMMES The order of the programmes in the table may not reflect their sequence on the control panel. Programme Degree of soil Programme phases Options Type of load • Normal soil • Prewash • ExtraHygiene • Crockery and cut- •...
  • Page 9 ENGLISH Programme Degree of soil Programme phases Options Type of load • Normal soil • Prewash • Crockery and cut- • Wash 50 °C lery • Rinses • Dry 1) This programme offers the most efficient use of water and energy consumption for crockery and cut- lery with normal soil.

  • Page 10: Settings

    5.2 Information for test In your request please include the product number code (PNC) found on institutes the rating plate. To receive the necessary information for For any other questions regarding your conducting performance tests (e.g. dishwasher please refer to the service according to EN60436), send an email to: book provided with your appliance.

  • Page 11: Options

    ENGLISH Level 0 deactivates the rinse aid CAUTION! dispenser and no rinse aid is released. Do not try to close the Factory setting: level 4. appliance door within 2 minutes after automatic How to set the rinse aid level opening. This can cause damage to the appliance.

  • Page 12: Before First Use

    The display shows the updated Not all options are programme duration. compatible with each other. If you select non compatible 7.2 TimeSaver options, the appliance automatically deactivates The TimeSaver allows to reduce the one or more of them. Only...

  • Page 13: Daily Use

    ENGLISH 8.1 How to fill the rinse aid CAUTION! dispenser Only use rinse aid designed specifically for dishwashers. 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation.

  • Page 14: Hints And Tips

    Starting a programme Cancelling a programme 1. Press the on/off button to activate Press and hold simultaneously Delay and the appliance. Make sure that the Option until the appliance is in appliance is in programme selection programme selection mode.
  • Page 15 ENGLISH Only then can the water completely • Make sure that glasses do not touch reach and wash the dishes. other glasses. • You can use dishwasher detergent • Put small items in the cutlery drawer. and rinse aid separately or you can •...

  • Page 16: Care And Cleaning

    11. CARE AND CLEANING 2. Remove the filter (C) out of filter (B). WARNING! 3. Remove the flat filter (A). Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms negatively affect the washing results.
  • Page 17 ENGLISH CAUTION! 4. To install the spray arm back, press An incorrect position of the the spray arm upwards and filters can cause bad simultaneously turn it washing results and damage counterclockwise until it locks into to the appliance. place. 11.2 Cleaning the upper spray We recommend to clean the upper spray arm regularly to prevent soil from...

  • Page 18: Troubleshooting

    Run long-duration prevent the buildup. 12. TROUBLESHOOTING If the appliance does not start or it stops With some problems, the display during operation. Before you contact an shows an alarm code.
  • Page 19 ENGLISH Problem and alarm code Possible solution The remaining time in the • This is not a defect. The appliance is working correctly. display increases and skips nearly to the end of program time. Small leak from the appli- • The appliance is not levelled. Loosen or tighten the ad- ance door.
  • Page 20 Problem Possible cause and solution Poor drying results. • Tableware has been left for too long inside a closed appliance. • There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level.

  • Page 21: Technical Information

    ENGLISH Problem Possible cause and solution Limescale deposits on the tub • Clean the appliance with appliance cleaners which are and on the inside of the door. particularly suitable for this purpose. • Try different detergent. • Contact the detergent manufacturer. Dull, discoloured or chipped •...

  • Page 22: Installation

    14. INSTALLATION Remove entire plastic There should be a minimum The hose should not be membrane from sink trap 2mm gap between the top of extended by more than spigot & fit drain hose to spigot the dishwasher and...

  • Page 23: Warranty

    This document sets out the terms and Appliance. This warranty is in addition conditions of the product warranties to other rights you may have under for AEG Appliances. It is an important the Australian Consumer Law.
  • Page 24 ‘ASC’ means Electrolux’s become the property of Electrolux. authorised serviced centres; 5. Travel and transportation costs: d) ‘AEG’ is the brand controlled by Subject to clause 7, Electrolux will Electrolux Home Products Pty bear the reasonable cost of Ltd of 163 O’Riordan Street,...
  • Page 25 Important Notice Before calling for service, please ensure that the steps listed in clause 8 above have been followed. SERVICE AUSTRALIA aeg.com/au FOR SERVICE FOR SPARE PARTS or to find the address of your nearest au- or to find the address of your nearest spare...
  • Page 26 FOR SERVICE FOR SPARE PARTS or to find the address of your nearest au- or to find the address of your nearest spare thorised service centre in New Zealand parts centre in New Zealand PLEASE CALL 0800 234 234...
  • Page 27 ENGLISH...
  • Page 28 www.aeg.com/au...

Table of Contents