For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
The T28930 24" Hydraulic Bending Brake offers
simple one-handed operation for accurate bend-
ing. A hydraulic ram and bending bar bend sheet
metal from 0˚-90˚.
To reduce your risk of
serious injury, read this
entire
using machine.
Eye injury hazard! Always
wear safety glasses when
using this machine.
Crushing hazard! Always
keep hands clear when
using this machine.
This machine and its com-
ponents are very heavy.
Get lifting help or use
power lifting equipment
such as a forklift to move
heavy items.
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
manual
BEFORE
COPYRIGHT © MAY, 2020 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
(FOR MODELS MFD. SINCE 12/18) #CS20186 PRINTED IN CHINA
MODEL T28930
24" HYDRAULIC
BENDING BRAKE
INSTRUCTIONS
Figure 1. Model T28930.
Specifications
Product Weight ........................................125 lbs.
Max Width Capacity ....................................... 24"
Max Thickness (Half Width Mild Steel)..14 Gauge
Max Thickness (Full Width Mild Steel) ..16 Gauge
Max Thickness (Aluminum) ..................12 Gauge
Max Thickness (Stainless Steel) ..........18 Gauge
Brake Range.............................................. 0˚–90˚
Min Reverse Bend ............................................ 1"
Max Beam Lift .................................................. 1"
Max Operating Pressure ........................ 20 Tons
Needed For Setup
Description
Additional Person for Lifting ................................. 1
Safety Glasses ............................................. 1 Ea.
Open-End or Socket Wrench 17mm ................... 2
Hydraulic Oil (ISO 32 or 46) ................As Needed
Cloth Rags ...........................................As Needed
Qty
V1.05.20