Toro 30284 Service Manual page 281

HYDROSTATIC DRIVE SYSTEM
5. Roll the PTO drive belt off the center mower deck
pulley (Fig. 0936).
6. Raise the machine so that the underside of the
frame can be accessed.
7. Remove the trailing shield from the frame by fi rst
removing the left end of the shield rod (bent at a 45
degree angle) from the hole in the chassis and then
remove the right side of the shield rod (bent at 90
degree angle) from the right side of the chassis (Fig.
6
0937).
6-2
Fig 0936 PICT-0283
Fig 0937 PICT-0273
8. Remove the idler arm spring from the spring post
(Fig. 0938).
Fig 0938
9. Remove the belt from the clutch (Fig. 0939).
Fig 0939
Floating Deck Mid-Size Service Manual
PICT-0291a
PICT-0294