Default Ip Address Settings - Hitachi SVP F 00 Series Manual

Default IP address settings

The physical SVP is pre-configured with a default IP addresses and bridge the LAN 1/3/4.
The user connects to the SVP using the IP address 192.168.0.15 for LAN1/3/4 ports
(management) or 10.0.0.100 for LAN2 port (maintenance), respectively.
Port Name of NIC
(user can change
a NIC name)
LAN Management
1 (User)
LAN Maintenance
2
LAN Management
3 (CTL1)
LAN Management
4 (CTL2)
IPMI N/A
Connected
to
Management
LAN
MPC or User
PC
DKC CTL1
DKC CTL2
User PC
Chapter 4: Installing the Hitachi Vantara-supplied SVP
Service Processor Technical Reference
Default IP address settings
Default IP IP address
address after bridge
is
configured
N/A (DHCP) 192.168.0.15
/24
10.0.0.100/2 <--
4
N/A (DHCP) 192.168.0.15
/24
N/A (DHCP) 192.168.0.15
/24
N/A <--
(disabled)
Notes
Part of
bridge. IST
uses
LAN1/3/4 or 2
ports for
Remote
Desktop
Protocol
(RDP).
Not a part of
bridge. IST
uses
LAN1/3/4 or 2
ports for RDP.
Part of the
bridge.
Part of the
bridge.
Not
supported
(user's
discretion)
28