Specifications - 3D Glasses (Sold Separately); Troubleshooting - 3D Images - Sharp AQUOS LC-46LE831E Operation Manual

Enjoying 3D image viewing
Specifications – 3D Glasses (sold separately)
3D glasses
Product
AN-3DG10-S/AN-3DG10-R/AN-3DG10-A
Model number
Lens type Liquid crystal shutter
3 V DC
Power supply
Lithium button cell (CR2032 × 1)
Battery
Battery life Approx. 75 hours of continuous use
172.7 × 47.5 × 170.0 mm
Dimension (W x H x D)
65.0 g (including the lithium button cell)
Weight
10°C to 40°C (The 3D glasses cannot operate fully at
extreme high or low temperatures. Use them within
Operating temperature
the specified usage temperature range).
Information
The product serial number is displayed on the 3D glasses as indicated in the
illustration on the left. The first four digits represent the product colour and the date of
manufacture.
Example: Silver coloured glasses manufactured on 11 August, 2010
S/N S 0 8 B
Bottom
Colour Year of manufacture
Silver
Red
Blue
Manufacture number
Month of manufacture Day of manufacture
* "I" , "O" , "Y" and "Z" are not used.

Troubleshooting - 3D Images

Problem
• 3D images are not • Is "3D auto change" set to "No"? Press 3D to switch to
displayed. 3D mode.
• If "3D auto change" is set to "Yes" but no 3D images are
displayed, check the display format of the content being
viewed. Some 3D image signals may not be recognized
as 3D images automatically. Press 3D to select the
appropriate display format for the 3D image.
• Is the power of the 3D glasses turned on?
• Are the 3D glasses set to 2D mode?
• Is there an obstacle between the 3D glasses and the TV,
or is something covering the infrared receiver on the 3D
glasses? The 3D glasses operate by receiving a signal
from the TV. Do not place anything between the 3D
infrared emitter on the TV and the infrared receiver on
the 3D glasses.
• The 3D glasses turn off • Is there an obstacle between the 3D glasses and the
automatically. TV, or is something covering the infrared receiver on the
3D glasses? The 3D glasses turn off automatically after
three minutes if no signal is received from the TV. Do not
place anything between the 3D infrared emitter on the
TV and the infrared receiver on the 3D glasses.
• Pressing the power button • Is the battery in the 3D glasses exhausted? If the LED
on the 3D glasses does light does not light after pressing the power button
not cause the LED light to for more than one second, the battery is exhausted.
light. Replace the battery.
72
Possible solution