Sharp EL-9900 Operation Manual page 215

Storing a
program line by
line
Blank line
Deleting a line
Deleting
command or
strings
Deleting an
entire program
Copying a line
to another
location
Changing the
program name
Re-executing
the program
Break the
execution
process
After pressing E, } or {, the line will be stored in
memory. Otherwise, it is not stored. Be sure to store the all lines
by pressing E ({ or }) before quitting editing
(pressing @ q).
Blank lines are ignored during execution. You can include blank
lines to gain better readability.
Move the cursor to the line you wish to delete and press C.
Move the cursor to on or after the letter you wish to delete and
press D or B, respectively.
Press @ p and use C DEL. (See Chapter 14 OPTION
Menu, page 224).
Press P H in the program edit mode. (See page 216 for
details)
Press { to move the cursor to the program name field. Enter
the new name and press E or }.
Pressing E again after execution of the program completes.
Press O or @ q to break the execution process.
Chapter 13: Programming Features
205