Selecting A Special Mode - Sharp MX-C380 Quick Start Manual

SELECTING A SPECIAL MODE

The procedure for selecting settings for "Adding margins (Margin Shift)" is
explained below as an example. Although the specific settings for each
special mode vary, the general procedure is the same.
The side to be scanned must be face up!
(1)
(2)
(3)
(4)
1
Place the originals.
When using the document glass,
place the original with the side to be
scanned face down.
2
Select settings.
BACK OK
(1) Select the [Special Modes]
key.
Select with
(2) Select the [Margin Shift]
BACK OK
key.
Select with
Settings to shift the margin 15 mm
down will be selected.
(3) Select the [Up] key.
BACK OK
Select with
The margin shift position is initially
set to "Up".
To set the margin shift position to
"Right", "Left", or "Down", select
the corresponding key.
(4) Select the number display
BACK OK
for the front side (side 1).
Select with
and press [OK].
and press [OK].
and press [OK].
and press [OK].
51