Table of Contents
Advertisement
M.-Nr. 09469886
WTS 510 plinth with drawer for washing machines and tumble dryers
Parts required
No.
Mat. no.
Designation
1
09322300
WTS 510 fitting kit
Included parts
No.
Mat. no.
Designation
1
Fitting instructions
1
WTS 510 plinth
1
Plinth rear panel
2
Connection piece
4
Spacer sleeve
3
Raised-head screw CEM 4 x 10
4
Threaded pin M10 x 40 mm
10
Adhesive strips for rear panel
1
06593051
Fitting kit for floor fastening
Special tool/s
No.
Mat. no.
Designation
Spirit level
Open spanner, 18 mm, or pipe wrench for threaded bolts (square) and dryer feet
Torx screwdriver, T20, for rear panel
Allen key, 5 mm (for dryer only)
Torx screwdriver, T30, for screws on the eccentric cam (for dryer only)
Risk of injury during fitting
DANGER
Risk of electric shock. Danger due to live parts.
A
Before any service or repair work is commenced, the machine must be disconnected from the mains.
DANGER
Risk of accident
A
Fitting can only be carried out with the washing machine or tumble dryer not installed. For deinstallation, see the
appropriate operating instructions.
A
Ensure that children or pets cannot access the work area while fitting work is being carried out.
A
Do not stand, or allow anyone to stand, on the drawer.
DANGER
Risk of crushing
A
Wear slip-proof working gloves and safety shoes.
A
When carrying out work, ensure that parts of the body, especially the hands and feet, are not positioned under or
between machines.
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
19 von 86
28.09.2018
Hide quick links:
Advertisement
Table of Contents
