Control Panel; Led Indicators; Charging Indicator - Craftsman CMXCESM14144 Instruction Manual

ENGLISH
9. ASSEMBLY INSTRUCTIONS
Remove all cord wraps and uncoil the cables prior to using the battery charger.
9.1
10. FEATURES
1

11. CONTROL PANEL

LED INDICATORS

POWER (green) LED lit: The charger is connected to AC power.

CHARGING INDICATOR:

Yellow/orange LED lit: The charger is charging the battery.
Yellow/orange LED flashing: The charger is in abort mode.
Green LED pulsing: The battery is fully charged and the charger is in maintain mode.
CLAMPS REVERSED (red) LED flashing: The connections are reversed.
BAD BATTERY (red) LED lit: The charger has detected a problem with the battery.
See Troubleshooting for more information.
NOTE: See Operating Instructions for a complete description of the charger modes.
12. OPERATING INSTRUCTIONS
IMPORTANT: Do not start the vehicle with the charger connected to the AC outlet, or it may damage the
charger and your vehicle.
NOTE: This charger is equipped with an auto-start feature. Current is supplied to the battery clamps
before a battery is connected, and the clamps may spark if touched together.
CHARGING A BATTERY IN THE VEHICLE
1. Turn off all the vehicle's accessories.
2. Keep the hood open.
3. Clean the battery terminals.
4. Place the charger on a dry, non-flammable surface, or use the convenient hook attachment to hang
the unit safely outside the work area.
5. Lay the AC/DC cables away from any fan blades, belts, pulleys and other moving parts.
6. Connect the battery, following the precautions listed in sections 6 and 7.
7. Connect the charger to a live grounded 120V AC outlet.
8. The green Power LED will light.
9. When charging is complete, disconnect the charger from the AC power, remove the clamp from the
vehicle's chassis, and then remove the clamp from the battery terminal.
2
3
4
5
6
1. Hook attachment
2. Charging indicator
3. Power LED
4. Clamps Reversed LED
5. Bad Battery LED
6. Battery clamps (quick-connect)
Not shown:
7. Ring connectors (quick-connect)
• 6 •