TABLE OF CONTENTS
1.
2.
..................................................................
3.
3-2. Cover ............................................................................... 13
3-6. SERVO Board ................................................................. 15
4.
............................................................ 19
5.
6.
6-1. Main Section ................................................................... 35
7.
Accessories are given in the last of the electrical parts list.
.............................................
.............................. 38
MEX-BT39UW/BT3900U/BT3950U
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
3
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated by
7
the charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The fl exible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
Never look into the laser diode emission from right above when
checking it for adjustment. It is feared that you will lose your sight.
If the optical pick-up block is defective, please replace the whole
optical pick-up block.
Never turn the semi-fi xed resistor located at the side of optical
pick-up block.
semi-fixed resistor
SECTION 1
optical pick-up
3