Philips 3000i Series Quick Start Manual

Mars DI TW_EN
Connectivity
You can use the app to control the puri er and check air quality.
Download and install the Philips app
Clean Home+
Open the app and click on "Connect a New Device" or press
the "+" button to connect your device. Please follow the steps
in the app.
Control
Power Filter status/ Display
reset switch
IAI
PM2.5
Gas
Display
Auto mode Turbo mode
Wi-Fi Filter cleaning
indicator alert
Gas Indoor allergen PM2.5
indicator index indicator
Gas index Allergen index
from L1-L4, 1-12, 1 indicates
L1 indicates best air quality
best air quality
Mode Light
switch on/o
Auto
Turbo
Sleep
Sleep mode
Filter replacement
alert
3-digit display
Air quality
IAI / light
Gas / PM2.5
Good Fair Poor Very poor
Maintenance
1
2
NanoProtect lter Series 3 (FY3430/30)
2
When display shows
Time to clean the NanoProtect lter Series 3
When display shows
Time to replace the NanoProtect
lter Series 3
Press to check lter lifetime status.
!
Press for 3 seconds to reset after cleaning or replacing lter.
The lter may produce smell after being used for a while because of the
absorption of indoor air. Remove the lter and place it where it has direct
sunlight and ventilation for several hours. Re-install and try using it again.
If the odor remains, please replace the lter.
90x127mm
3000 048 96142-1