Maintenance - AEG MTE 350 Operation And Installation

Activating the safety pressure limiter
1
2
1 1-pole safety pressure limiter MTE 440 / MTE 570
2 2-pole safety pressure limiter MTE 350 / MTE 650
Installation - for contractors

14. Maintenance

DANGER Electrocution
Before any work on the appliance, disconnect all
poles from the power supply.
Draining the appliance
DANGER Scalding
Hot water may escape during the draining process.
If the appliance needs to be drained for maintenance or to
protect the whole installation when there is a risk of frost,
proceed as follows:
» Close the shut-off valve in the cold water inlet line.
» Open the draw-off valve.
» Undo the water connections on the appliance.
41