Table of Contents
Advertisement
Quick Links
1
GSM/GPRS/GPS Tracker
User Manual
Preface
Thank you for purchasing the tracker. This manual shows how to operate the device smoothly
and correctly. Make sure to read this manual carefully before using this product. Please note
that specification and information are subject to changes without prior notice in this manual.
Any change will be integrated in the latest release. The manufacturer assumes no
responsibility for any errors or omissions in this document.
Contents
1.
F
........................................................................................................................... 3
UNCTION INTRODUCTION
Advertisement
Table of Contents
Related Manuals for Zodiak GPS307
Summary of Contents for Zodiak GPS307
- Page 1 GSM/GPRS/GPS Tracker User Manual Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release.
-
Page 2: Table Of Contents
.............................. 3 PPLICATIONS ..........................3 ARDWARE ESCRIPTION ............................... 4 CCESSORIES ............................4 PECIFICATIONS .............................. 5 NSTALLATION SIM Card Installations........................5 Operation instructions.........................5 Indicator mode............................ 6 Initialization............................6 Change Password..........................6 Authorization ...........................7 Single Locating..........................7 Auto track continuously........................8 Turning points update automatically....................8 GPS drift suppression........................ -
Page 3: Applications
Function introduction 1.1. This tracker is a new product based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. It can track and monitor remote target by SMS or internet. -
Page 4: Accessories
Microphone Inductive key Fixed Frame Accessories Picture Item Name Specs Note Standard Inductive Standard Input: AC110～240V AC Charger Output: 5V Standard Charger cable Specifications Content Specs 8.3×5.4×2.9cm 170g Weight GSM/GPRS Network 850/900/1800/1900Mhz Band -159dBm GPS sensitivity GPS Accuracy Cold status 45s Warm status 35s GPS start time Hot status 1s... -
Page 5: Installation
-20°C to +70°C Operation Temp. 5%--95% non-condensing Humidity Installation 6.1 SIM Card Installations Please make sure the SIM card is for GSM network and able to execute the function of incoming calls display, no calls can be diverted and the PIN code is locked. The SMS format must be TXT format, and can’t recognize the PDU format. -
Page 6: Indicator Mode
for more information 6.3Indicator mode Send command “light+password+space+mode” to device, mode 1 indicator Driving mode, default mode is mode 0, Indicator light is off. Indicator is off and never blinks. Quick blink when driving and stop Driving blink when parking. Quick blink Keep blinking fast Blink... -
Page 7: Authorization
6.6 Authorization Up to 5 numbers can be authorized 6.6.1 Call the tracker for 10 times continuously and get its position, then it will save the cell phone number as the authorized number automatically., and reply “add master ok”. 6.6.2 Authorization: Send SMS “admin+password+space+cell phone number”... -
Page 8: Auto Track Continuously
-LAC code. Open www.gpstrackerxy.com find “manual track”, and put the received code in LAC and Cell-ID fields to location by LBS technology. Auto track continuously Tracker can send automatic location reports at set intervals. If SMS mode is active, reports will be sent as SMS text messages; if GPRS tracking mode is active, update intervals to the server will be adjusted. -
Page 9: Gps Drift Suppression
6.10 GPS drift suppression 6.10.1 This function deactivated default, activate this function, send "suppress+password" to tracker, it will reply" suppress drift ok". The GPS data stop updating if vehicle is not driving and latitude and longitude always keep same, and GPS data updates automatically when vehicle is moving. -
Page 10: Data Load
“save ok”. 6.14.4 Logging Clearance: send SMS: “clear+password” to tracker device, it will reply “clear ok”. 6.14.5 Logging Volume: internal Flash ,Can log 16000 position info 6.14.6 The logged data can be copied to computers through card reader, and then the data route can be checked by importing data in the menu “Data Import”... -
Page 11: Geofence
6.17.3 Geofence Set up a geo-fence for the tracker device to restrict its movements within a district. The unit will send SMS to the authorized numbers when it goes out of this district. Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send SMS“stockade+password+space+latitude,longitude;latitude,longitude”... -
Page 12: Shock Sensor Alarm
Send SMS command “arm+password” to the tracker device, the tracker enter armed state, and It will reply “Tracker is activated”. 6.19.2 DISARM Send SMS command "disarm + password" to the tracker device. Tracker enter disarmed state and reply “Tracker is deactivated”. -
Page 13: Bicycle Model I (Default Mode)
No shock, the unit will enter sleep mode No shock and no other alarms being with GPS &GSM off and runs in minimum triggered, GPRS disconnected power consumption, SMS and calling cannot Bicycle automatically and enter “Bicycle reach. In arm state, shock can awake the mode I mode I”, and will be back to online tracker to work;... -
Page 14: Scheduled Wake-Up
6.22 Scheduled wake-up Send "schedule+password+space+1h", It will awake every 1 hour, automatically send location message after waking. (m: minute; h: hour; d: day). The maximum time interval is set to three digits, and no more than 30 days. After sending this message, GPS & GSM module shut off, device running in lowest power consumption, Calls or messages cannot awake it. -
Page 15: Terminal (Local) Time Setting
GPS: OK/NO GPS GSM Signal: 1-32 Note: The higher digit it shows; the better. 6.27 Terminal (local) Time Setting Send SMS command “time+space+zone+password+space+time” to the device, If succeed, it will reply “time OK” For example: Send SMS “time zone123456 8”, 8 is Chinese time zone, If your country time zone is minus, send SMS “time zone123456 -8”. -
Page 16: Configure Ip And Port
For instance, send SMS “upone123456 jonnes 666666” to the tracker, and if succeeded, tracker will reply “user, password OK” Note: 123456 is tracker device password, jonnes is the user name for GPRS login, 666666 is the password for GPRS 6.29.3 Configure IP and Port Send SMS as below via a cell phone: adminip+password+Space+IPAddress+Space+Port Number. - Page 17 1.choose the right server to login in 2.Validate your IMEI is valid or not 3. Click "register". Pop-up a dialog box, register an account Login 6.30.2 Input newly registered user ID and password, click "login" 6.30.3 Add a terminal...
- Page 18 5.add terminal 6. add terminal 7.Enter IMEI 8.Name 9.choose location 10. save icon 称 11 .the newly registered device is offline in grey color. 6.30.4 Configure your tracker to web platform to track it online 6.29.1 Step 1：set APN，refer to 6.29.2 Step 2：set GPRS user name and password，refer to Step 3 ：...
- Page 19 6.30.6.1Download and install the mobile APP software According to your phone type, download and install mobile app below the home page on web tracking platform 6.30.6.2 Login in and use the mobile APP under GPRS version 2. Filling the registered user ID and password 3.
- Page 20 11. Click here to operate the device 6.30 .6.3 login in and use the mobile APP under SMS version 2.Use”mc” as the initial user ID,password is 8888, change the user name and password after entry 1.Choose SMS LOGIN 3.Click “login”...
- Page 21 4.Choose “add device” 5. Filling the device name 6.Choose the type 7. Filling the SIM PHONE NUMBER 8.Filling the tracker’s password 9.Click “ok” 10. Click the icon, and dispaly the list 11. Click here to operate the device...
-
Page 22: Cautions
13.Click to send commands 14.Filling the parameters manually and then click “send” 12.Click here to see more menu Remarks: APP on Android phone can track the address and show alarm by SMS; IOS APP can only send commands due to the confined policy Cautions please comply with the instructions to extend the unit life:：... -
Page 23: Faults & The Solutions
Faults & the Solutions Faults Solution Please check if battery is charged Fail to turn it on Please check if SIM card installed correctly. Please check if SIM card is GSM network. Don’t turn on the PIN code No GSM signal ...