SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1
User Manual
Type
Tool
Multimeter
DC voltage
measurement range
≥ 1500 V DC
Hydraulic pliers
Personal
protective
equipment
(PPE)
Safety gloves
4.3 Determining the Installation Position
4.3.1 Environment Requirements
Basic Requirements
●
●
●
●
●
Issue 05 (2020-08-30)
Marker
Heat shrink tubing
Safety goggles
Do not install the inverter in working or living areas.
If the device is installed in public places (such as parking lots, stations, and
factories) other than working and living areas, install a protective net outside
the device, set up a safety warning sign to isolate the device, and prevent
unauthorized personnel from approaching the inverter. This is to avoid
personal injury or property loss caused by accidental contact or other reasons
during device operation.
Do not install the inverter in areas with flammable materials.
Do not install the inverter in areas with explosive materials.
Do not install the inveter in areas with corrosive materials.
Copyright © Huawei Technologies Co., Ltd.
Measuring tape
Heat gun
Anti-dust
respirator
4 Installation
Bubble or digital
level
Binding strap
Safety boots
21