Using Auto Backup to send videos or photos
Installing the programme for Auto backup on
your PC
1
Connect the camcorder to a PC with the USB cable.
2
Turn on the camcorder.
The computer recognises the camcorder and Intelli-studio
•
launches automatically.
3
When the pop-up window for the Auto backup installation
programme appears on the PC screen, click OK.
•
To install the programme, follow the instructions on the pop-up
window.
After installation, reconnect the camcorder and then confirm the
•
server information message.
To run the programme, disconnect the camcorder from the PC.
•
This programme is for backing up files to the PC based on Windows
OS.
Sending photos or videos to a PC
1
Press the [Home (
)] button
Social Sharing Auto Backup
TV Link
Settings
•2
touch Auto Backup.
Wireless network (HMX-QF20 only)
2
Touch the
Confirm
•
The camcorder will automatically attempt to connect to a WLAN
via the most recently connected AP device.
•
If the camcorder has not previously been connected to a
WLAN, it will search for available AP devices.
If your PC has turned on, the PC recognises the camcorder and
•
Intelli-studio launches automatically.
If your PC supports the Wake on LAN (WOL) feature, you can
•
turn on the PC automatically by searching for the PC from your
camcorder.
pages 79~80
3
The camcorder will prepare to send the files and send them
to the PC.
You cannot select individual files to send. This function is
•
available only for newly stored files on the camcorder.
The progress will be shown on the PC monitor.
•
•
The camcorder will search for available access points even if you are
connecting to the same access point again.
•
If you turn off the camcorder or remove the battery while sending
files, the file transfer will be interrupted.
•
While you are using this feature, the buttons on the camcorder will
be disabled.
•
You can connect only one camcorder to the PC at a time for sending
files.
•
The backup may be canceled due to network conditions.
•
Videos or photos can be sent to a PC one time only.
•
Files cannot be sent again even if you reconnect your camcorder.
78
tab.
page 72