Advertisement
Quick Links
MAINTENANCE:
requires no maintenance.
Your CAT-40G
Product Limited Warranty
All Labelmate Products are warranted to the original end-user customer to be free from defects in
materials and workmanship. If it is determined by Labelmate that a product has failed under the terms of
this warranty, the product will be repaired or replaced at no charge to the customer. Labelmate reserves all
rights to determination of coverage and liability under this warranty. The warranty period for all new
Labelmate products is outlined below:
Warranty Period
5 years
3 years
1 year
The warranty period for all products starts on the date purchased by the original end-user customer.
Warranty coverage is not transferable with ownership and will terminate immediately upon rental, resale or
any other change in ownership. This warranty does not cover repair to any product which is damaged, has
been modified, is missing parts, or has been opened or repaired by any unauthorised person. Use of any
unauthorised accessory or attachment will void coverage. Purchase documentation should be retained for
coverage verification.
In the event your product requires service, please contact the distributor you bought the product from. The
customer assumes responsibility for all cost and risk incurred in transport for service.
Labelmate makes no other warranty of any kind expressed or implied, or to suitability or fitness for a
particular purpose. No other person, agent or reseller is authorised to give any warranties on behalf of
Labelmate. Any obligation to warranty other than that specifically addressed above is hereby disclaimed.
LABELMATE LLC
69 AVENUE ALPHONSE XIII, 1180 BRUSSELS, BELGIUM
TEL: +322.375.69.60 – FAX: +322.375.38.96
brussels@labelmate.com
www.labelmate.com
© LABELMATE – User_CAT-40G – 02/07
Products Covered
Label Rewinders
Label Unwinders
Label Counters (mechanical parts
only)
Label Slitters (mechanical parts
only)
Label Dispensers
Printer Mechanisms
Power Supply Modules
Counter modules
Encoders
Any products not specified above.
CAT-40G / CAT-40G-TA
40-cm (16") High-Torque Gear Driven
On-Demand Label Rewinder
•
Switched Dual Torque
Range and Direction
Controls
•
Constant Adjustable
TM
Torque
"CAT"
technology
•
Adjustable Speed
Control of min. 360mm
(14") per second
•
Precise Variable Torque
Control
•
On-demand Rewinding
Turns Off when Labels
Stop Coming from Your
Printer (TA only)
Remove all parts from the shipping container and verify contents.
Package Contents
•
User Manual (this document)
•
CAT-40G Drive Unit
•
Power Supply Module
•
LABELMATE "Quick-Chuck" ™ Quick-Locking Core Chuck
•
Allen Wrench
•
Plastic Flange Plate
•
Tension Arm (CAT-40G-TA only)
Retain the Shipping Container and Packaging for Storage and Transport
● KEEP MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE ●
CAT-40G
CAT-40G-TA
Advertisement
Related Manuals for Labelmate CAT-40G
Summary of Contents for Labelmate CAT-40G
- Page 1 • Switched Dual Torque materials and workmanship. If it is determined by Labelmate that a product has failed under the terms of Range and Direction this warranty, the product will be repaired or replaced at no charge to the customer. Labelmate reserves all Controls rights to determination of coverage and liability under this warranty.
- Page 2 Shaft EXTERNAL HALT CONTROL: 3. Set the CAT-40G in place near the label exit slot of the printer. The External Halt Control jack on the CAT-40G is for use with external devices 4. CAUTION: AVOID ACCIDENTS. THE CAT-40G WEIGHS APPROXIMATELY capable of providing an open circuit halt command.