Table of Contents
Advertisement
Wake On LAN Function
<Wake On LAN> is a function that activates the system in rest mode when a signal
(such as ping or magic packet commands) arrives from network(wired LAN).
To use <Wake On LAN> function:
1. Click Start > My Computer > My Network Places > View network
connections.
2. Click the right button on the touchpad over Local Area Connection, and select
Properties.
3. Click Configure, and select Power Management tab. Select 'Allow this device to
bring the computer out of standby', then click OK. Restart the system.
If the system in rest mode is activated when there is no received signal, use the system
after disabling <Wake On LAN> function.
Connecting wired LAN while using wireless LAN may not execute <Wake On LAN>
function. Configure wireless LAN to 'Disable' to use <Wake On LAN> function.
34 Users Manual
Advertisement
Table of Contents
