Table of Contents
Advertisement
Turning On the Computer
To turn on the computer's power for the first time:
1. Slide the LCD latch, located on the front of the cover to the right.
2. Lift up the cover.
3. Press and then release the power button.
The power light is on when the computer's power is on.
Cover Latch
Initial Computer Startup:
The first time you start your computer you will see the operating system
registration screens. Simply read each screen and follow the simple directions.
You must complete this process in order to use your computer. A tutorial is
provided if you require it.
Adjusting the LCD Display
You may wish to adjust the LCD (Liquid-Crystal Display) when you begin using your
computer. A TFT (Thin-Film Transistor) LCD does not require adjustment for contrast
because the contrast is set to remain at maximum.
To adjust the LCD:
Press
Press
8 Users Manual
+
<Fn+Right Arrow> to increase the display brightness.
+
<Fn+Left Arrow> to decrease the display brightness.
Power button
Power Light
Advertisement
Table of Contents
