Operating And Indication Elements - Honeywell luminAXS Series Mounting And Connection Instructions

28
3.

Operating and indication elements

3.1 Keypad and LED indication
Numeric keypad for PIN entry
(PIN = Personal identification number)
1 2
4 5
7 8
0
r
Cancel / Confirm entry
delete entry OK
The LEDs and the buzzer are controlled over a bus system. The definition for each is specified in the
main software and not at the reader.
Special case MIFARE DESFire EV1/EV2 reader:
After the operating voltage has been applied, the LEDs green, yellow and red flash
simultaneously for 5 seconds at 2 Hz intervals. In this case, the interface is programmed in
Clock/Data mode.
Special case fault: The DUO LED flashes red / green.
In this case there is a
Mounting and Connection Instructions Reader series "luminAXS"
3
6
9 F
3
i
Italics functions only in combination with IDS.
system fault . Please contact our application engineering.
Lighting ring
Arm
LED green
Disarm
LED
yellow
Function key
DUO LED
red/green
Information
Reader without keypad: The arrangement of
the LEDs is identical to the reader with 2 keys.
Keys and on ACS:
arm/disarm an IDS via ACS
Arm
LED LED
green yellow
Disarm
DUO LED
red/green