Wireless Network Setup Using The Wireless Lan Setup Program - Samsung NM40 User Manual

Wireless Network Setup Using the Wireless LAN Setup
Program
When the operating system of your computer is not Windows XP, you should setup the
wireless network settings using an additional wireless LAN setup program (PROSet).
To use wireless network connection, complete the following procedures.
•
Step1. Install the wireless LAN configuration program (PROSet).
•
Step2. Configure wireless network settings through the wireless LAN
configuration program.
Step 1. Installing the wireless LAN configuration program (PROSet)
You can install the wireless LAN client administrator program following the
instruction displayed automatically when you insert the system software CD. Insert the
system software CD into the CD-ROM drive, and install the wireless LAN
configuration program.
To disable the 'Intel Configuration Service' window afterward
After installing the wireless LAN configuration program, select "Do not show
this again." check box, then click Close.
Step 2. Using the wireless LAN configuration program (PROSet)
Double-click the wireless LAN program (
(Or, click Start > All Programs > Intel Network Adapters > Intel(R) PROSet for
Wireless.)
In some languages, some buttons on the window may not be displayed. If this
is the case, resize the window to use the program.
Configure wireless network settings in PROSet following the procedures below.
50 Users Manual
) icon on the taskbar.