Connecting An External Analog Component - Samsung HT-TP33 Instruction Manual

1p~38p(UP30/TP33)-GB

Connecting an External Analog Component

Analog signal components such as a VCR or TV.
If the external analog component
has only one Audio Out, connect
1
Connect Video Out on the Home Theater to
Video In on the TV.
2
Connect Video In on the Home Theater player to
Video Out on the external analog component.
3
Connect Audio In on the Home Theater to Audio
Out on the external analog component.
•
Be sure to match connector colors.
4
Press AUX on the remote control to select AUX 1
or AUX 2 input.
•
Each time the button is pressed, the selection changes as
follows: DIGITAL IN
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD
AUX 1 AUX 2
3/14/05 10:39 AM Page 21
Audio Cable
(not supplied)
either left or right.
AUX 1 AUX 2.
DIGITAL IN
FM AM.
Note
•
If you have connected an external digital
component and also an Analog
component to Video In (1, 2) at the same
time, there will be video from AUX 1 even
when you select DIGITAL IN.
•
If you have connected Audio In (L, R) to
1, connect Video In to 1 as well, and if
you have connected Audio In (L, R) to 2,
connect Video In to 2 also.
•
When you select Aux 1 or 2, you are
selecting Video 1 or 2 inputs respectively.
GB
18